• BBS2600KPR

    Hi, I'm trying to find out what the tested/approved memory is for the above board.   The links to the approved Memory is no longer on the web page?   Any help appreciated.   Thanks in advance.  ...
    xel001
    last modified by xel001
  • Cable for RSP3WD080E and RSP3TD160F?

    I heard that LSI 9460-16i, which has the same controller, can't use the SFF-8639 to SFF-8643 cable included in intel SSDs to connect to NVMe drives directly. Does intel tri-mode HBA\RAID cards have the same issue? If ...
    Kagamine_Rin
    last modified by Kagamine_Rin
  • Omni-Path Fabric Design Related

    Referring the Intel® Server Board S2600BP and Intel® Compute Module HNS2600BP Product Family Integration and Service Guide .   1. #558210 - Intel Omni-Path Fabric Carrier Card Fab3 - Design Kit - Revis...
    ZAID
    last modified by ZAID
  • VCA 1283LVV one of the nodes in link_down status

    Hi unfortunately i didn't find information about VCA and troubleshooting for that type of devices. I'll try to explain what issues we have. Our company have remote server with two this card, not so long time ago on...
    fysh
    last modified by fysh
  • Сервер в сборе

    В конфигураторе собрал сервер для АТС Asterisk.   Достаточно ли данной конфигурации для сборки и монтажа в стойку 19'?   Или что-то нужно ещё добавить/убрать?
    Ecoteo
    last modified by Ecoteo
  • Intel S3200SHV

    Supports the Intel s3200shv motherboard EFI/UEFI  boot ??? Can i install Windows Server on GPT disk?
    Kuznetsov
    last modified by Kuznetsov
  • R1000SPO (R1308SPOSHORR) maximum RAM height

    Hi   The R1000SPO has a CPU plastic air duct that covers the RAID, CPU and RAM, this means there would be a restriction on the RAM height, the duct i would assume is high enough to be just under the lid, we are ...
    (((GRIFFCOMM
    last modified by (((GRIFFCOMM
  • Intel Server S5500BC + hard disk

    Ciao a tutti, possiedo un server intel S5500BC ed ho montato 4 hard disk da 6 tera ( che allego in foto). Ora, mi hanno detto che questi non sono compatibili e che ci vorrebbe il rack nuovo.   Qualcuno ne sa qu...
    raffux3
    last modified by raffux3
  • Bom dia, em um sistema de  servidor Dell R640 com processador Intel Xeon 5118 que tem barramento de memoria de 2400hmz, alguem sabe me dizer qual seria o meu ganho em desempenho se esse mesmo processador fosse com barramento de 2666mhz.

    Em um sistema de  servidor Dell R640 com processador Intel Xeon Gold 5118 Skylake que tem barramento de 2400mhz, se esse mesmo CPU tivesse um barramento de 2666mhz, qual seria meu ganho real em desempenho.? Algu&...
    Powermania
    last modified by Powermania
  • RS2SG244 RAID 6 with 12 Terabyte Helioseal WD Drives

    My server has 2 RAID 6 arrays, both RAID 6, 7 x 6tb Western Digital 6tb WD60EFRX Red SAN drives array & 16 4tb Western Digital WD4001FAEX Black Caviar Enterprise array.   I use an@ Intel S2600CP Motherboard ...
    Viv
    last modified by Viv
  • Can one use (install) two of FUP8X25S3NVDK in ONE P4304XXMUXX?

    Can one use (install) two of FUP8X25S3NVDK in ONE P4304XXMUXX?   E.G. by using a Broadcom MEGARAID 9460-8I   If yes, will there be 4, 8, 16 nvme ssd usable?
    Tom2323
    last modified by Tom2323
  • SR2600URBRPR - RAM update

    Hi All,   I have the below server and currently looking at upgrading RAM to max capacity according to https://ark.intel.com/products/48665/Intel-Server-System-SR2600URBRPR    Prod.code SR2600URBRP...
    Robert_Ciobanu_85
    last modified by Robert_Ciobanu_85
  • Sobre Xeon® E5-2690 la velocidad y los MIPS que ejecuta?

    Alguien que me pueda apoyar con la información de los MIPS del Xeon E5-2690
    Marck.jt7
    last modified by Marck.jt7
  • S2600CO4 UEFI boot

    This Motherboard BIOS support UEFI boot mode. Why not make open to the public? I use intel750 SSD to install the WINDOWS 10 system but t he motherboard does not recognize. In a China Forum someone p roduced UEFI mo...
    修仙纸
    last modified by 修仙纸
  • PCI-e 8 pin power from a P4304XXMUXX

    My system is a P4304XXMUXX chassis with an S2600STB motherboard, 750W Intel PSU and a Xeon Gold 6148 (only 1 CPU so far) I have a Gigabyte GeForce GTX 1070 in the 5+6 PCI-e socket position. The GPU uses 150W, but ac...
    Canno
    last modified by Canno
  • RMS25JB040 without a compatible motherboard

    Greetings.   Is there a way to get advantage of a RMS25JB040 raid controller if I don't have a compatible server board? Are there any pci-adapter cards or something to get it running on a trivial motherboard? &#...
    ReeZee
    last modified by ReeZee
  • Enable Hyper-threading

    Hello fellows,   I have one question on Hyper-threading ,Is it possible to enable/disable hyper-threading without using bios settings e.g. using syscfg and without rebooting server ? because i'm working with ple...
    Akash_Dumbre
    last modified by Akash_Dumbre
  • Is the AXXRMM4LITE2 module compatible with a S2600CP2J board?

    I have a system with a S2600CP2J board. I would like to enable its KVM features by adding a remote management module that works with this board (AXXRMM4 or AXXRMM4LITE). Since I don't necessarily need a dedicated NIC...
    ePix
    last modified by ePix
  • PROBLEM POWER H2312XXLR3 barebone with 2x Compute Module HNS2600BPQ

    Good After!   I need the help of the Technical Department, because I have a H2312XXLR3 barebone with 2 Compute Module HNS2600BPQ, and they do not power either one. The Buttons Power and ID, don't respond.  ...
    migbermar
    last modified by migbermar
  • Intel R2312WTTYSR & HP HBA Adapter H241

    Intel R2312WTTYSR not booting with HP HBA Adapter H241. How can i boot the server?
    Progresstech
    last modified by Progresstech