• Right Click on Desktop causes Delay because of igfxsrvc.exe

    Hello,   the process igfxsrvc.exe is apparently part of the Intel Common User Interface and in use/started when I perform a right click on the desktop which causes an annoying delay of about 2 seconds while open...
    Leviathan
    last modified by Leviathan
  • What is the right heatsink for the DQ77CP m'board

    This board has raised circuits close by 2 sides of the chip housing (or whatever it's called?) and therefore no standard round heatsink/fans are workable. Where can I find such a heatsink?
    binkyd
    last modified by binkyd
  • my motherboard is dh61ww...can i use zotac gt710 2gb ddr3 graphic card.........my processor is intel pentium g2020

    can use zotac gt710 2gb graphic card in my intel dh61ww motherboard...my processor is intel pendium g2020
    donkakkassery
    last modified by donkakkassery
  • Motherboard LGA1155 DDR3 1600 ATX; Compatible With Samsung SSD 850 PRO

    I have a desktop with the motherboard above: Amazon.com: Intel Desktop Motherboard LGA1155 DDR3 1600 ATX - BOXDZ77RE-75K: Computers & Accessories   I would like to know if it is compatible with the Samsung ...
    LRClifford02
    last modified by LRClifford02
  • erro display led 1c placa mãe DP67BG

    boa tarde galera estou com uma placa mae intel dp67bg a mesma se encontra com o erro 1c no display led e não incia apenas liga e desliga alguma solução para meu problema ?
    uarlei
    last modified by uarlei
  • DZ77RE-75K BIOS Update - SPECTRE & MELTDOWN

    I understand DZ77RE-75K desktop board support has been discontinued and the last BIOS 0066 available for this platform is of May 2013 but given the recent security revelations re "Spectre & Meltdown" will INTEL ...
    Win7ine
    last modified by Win7ine
  • intel® Core™ i7-3820 Processor support pci express 3.0 My main Board is DX79TO

    Hello   Does it support Pci Express 3.0   intel i7 3820 2ng gen. intel DX79TO Board LGA2011
    HarinderSingh
    last modified by HarinderSingh
  • DX79SI Motherboard Mouse Keyboard and Display Issue

    Have a DX79si motherboard was working fine till the keyboard and mouse and the display stopped working any one had the same problem? If so is it fixed?
    DanZi
    last modified by DanZi
  • ram upgrade in a Toshiba laptop with Intel HM55 (IbexPeak-M DH)  chipset

    Hello guys,   I'm looking for a 4gb upgrade for an old laptop, a Toshiba satellite c645, part number PSC02U-00LLM1 number get by toshiba info tool.   Hwinfo64  says that the laptop have a HM55 chipset...
    sanslash332
    last modified by sanslash332
  • DX58SO2 Post cord 58

    My board is dx58so2.     A few days ago, USB devices were repeatedly recognized.     3 beeps after rebooting. You have reinstalled RAM.     After that, you will not hear any beeps, bu...
    sauoory
    last modified by sauoory
  • DP45SG no boot no display

    Building a PC with this board, using hynix 2GB 2Rx8 PC3-10600U ram module 550 watt PSU Intel Core 2 Duo E6750   I get no picture and no bib   Have tried without RAM module, only CPU and fan, still no pi...
    Kaastrup
    last modified by Kaastrup
  • DX79TO

    Hi. What is the latest Graphic card compatible with DX79TO? I don't want to buy high end graphic card and not work. I don"t want to waste my money. Can you guys help me? Thank you very much
    NickGamer
    last modified by NickGamer
  • Intel Desktop Board for Z390 Chipset ?

    To Intel   This is comes from your loyal customer, I'm still using the DZ87KLT-75K till this very moment and I know many people are still using it, its a solid board and there is no proper upgrade from it by the...
    stephenb.b.r
    last modified by stephenb.b.r
  • After switch on CPU have a delay around 3 to 5 minutes and then booting my system, please hep

    Thanks in advance. When I switch on my power in mother board I am able to see the stand by light is on, then if I switch on the cpu power button its taking some time 3 to 4 min to boot. But there wont be any issue i...
    msramms
    last modified by msramms
  • Some test about Skulltrail(D5400XS) with 2xGTX680 SLI

    I did some test on Skulltrail recently with 2xQX9775 in 4ghz and 1.5V.Besides I also overclocked those GTX680 by using  GPU TWEAK.I think the Skulltrail platform I made was still peforming well though it is an an...
    Chouyang
    last modified by Chouyang
  • Populating Asset Tag Information

    OK, so as I understand it, I can use the Intel Integrator Toolkit and/or Assistant to enter asset tags, but I can't seem to find much information on what I'm doing wrong. I would like to update the BIOS with my prefe...
    sflesch
    last modified by sflesch
  • Don't upgrade your BIOS after warranty, old BIOSes on Intel page are faulty and it will destroy your motherboard!

    Stay away from upgrading BIOS on old motherboards, Intel hacked BIOS files and it will destroy your hardware!
    dan123456
    last modified by dan123456
  • Issue with new DH61AG ECS G24 Flat Panel Compatiblity

    Just purchased a new DH61AG to replace my ECS G24 Aura AIO w/3770s and 16 GB Ram and SSD (H61H2-TI fried) Was running Win10 Pro x64, updated new board to BIOS 109 (was 40), selected "ECS 21" in AIO BIOS dropdown menu,...
    Chucker18
    last modified by Chucker18
  • Compatible Graphics card for G630

    Can anyone please suggest a Graphics Card suitable for my computer?  
    Pradeep_Sambandam
    last modified by Pradeep_Sambandam
  • S5000XVN + x5470?

    Hey! Will this S5000XVN motherboard work with a x5470 processor? I know that there is no such processor in the manual, but I saw several users with such configurations (look at the screenshot), maybe in the manual t...
    Kasvlad
    last modified by Kasvlad