• What is the right heatsink for the DQ77CP m'board

    This board has raised circuits close by 2 sides of the chip housing (or whatever it's called?) and therefore no standard round heatsink/fans are workable. Where can I find such a heatsink?
    binkyd
    last modified by binkyd
  • Issue with Extreme Tuning Utility - Tuning capability is gone

    Hi, I have i7-2600k with a DP67BG board. I have this system for several years and I have been always using Intel's extreme tuning utility to overclock my system successfully. Recently I have formatted my PC and upgr...
    Evgy
    last modified by Evgy
  • my motherboard is dh61ww...can i use zotac gt710 2gb ddr3 graphic card.........my processor is intel pentium g2020

    can use zotac gt710 2gb graphic card in my intel dh61ww motherboard...my processor is intel pendium g2020
    donkakkassery
    last modified by donkakkassery
  • erro display led 1c placa mãe DP67BG

    boa tarde galera estou com uma placa mae intel dp67bg a mesma se encontra com o erro 1c no display led e não incia apenas liga e desliga alguma solução para meu problema ?
    uarlei
    last modified by uarlei
  • DZ77RE-75K BIOS Update - SPECTRE & MELTDOWN

    I understand DZ77RE-75K desktop board support has been discontinued and the last BIOS 0066 available for this platform is of May 2013 but given the recent security revelations re "Spectre & Meltdown" will INTEL ...
    Win7ine
    last modified by Win7ine
  • How to enable VT-d on Intel DX79TO BIOS?

    I'm running an E5-2670v1 on an Intel DX79TO motherboard with the latest BIOS version (0650). I cannot find how to enable VT-d in the BIOS. I did find and enabled VT but VT-d (IOMMU) is nowhere to be found in the BIOS...
    rudyazo
    last modified by rudyazo
  • DX79SI Motherboard Mouse Keyboard and Display Issue

    Have a DX79si motherboard was working fine till the keyboard and mouse and the display stopped working any one had the same problem? If so is it fixed?
    DanZi
    last modified by DanZi
  • DX58SO2 Post cord 58

    My board is dx58so2.     A few days ago, USB devices were repeatedly recognized.     3 beeps after rebooting. You have reinstalled RAM.     After that, you will not hear any beeps, bu...
    sauoory
    last modified by sauoory
  • After switch on CPU have a delay around 3 to 5 minutes and then booting my system, please hep

    Thanks in advance. When I switch on my power in mother board I am able to see the stand by light is on, then if I switch on the cpu power button its taking some time 3 to 4 min to boot. But there wont be any issue i...
    msramms
    last modified by msramms
  • Some test about Skulltrail(D5400XS) with 2xGTX680 SLI

    I did some test on Skulltrail recently with 2xQX9775 in 4ghz and 1.5V.Besides I also overclocked those GTX680 by using  GPU TWEAK.I think the Skulltrail platform I made was still peforming well though it is an an...
    Chouyang
    last modified by Chouyang
  • Intel dz68BC not posting showing 00

    dear community, to some reason I don't know why my pc was freezing whenever I played games or do some work even sometimes it froze while doing nothing so I read somewhere about the bios issue and to update it theref...
    SiddharthSurya
    last modified by SiddharthSurya
  • Intel DX58SO2 socket b & modern graphic cards: Radeon Rx560 etc

      Hello everyone ! I have been struggling to get a Sapphire RX560 4GB  working with  this board -DX58SO2- but I have no luck so far; it seems it cant recognize it. On my first install of the card with...
    Frappedieros
    last modified by Frappedieros
  • Can I use 4 DIMMs of Ram for DX58SO board?

    Hello,   I have been using Intel DX58SO mother board for nearly 10 years with 3x4GB DIMMs of ram as this mother board manual suggested to use only the blue coloured 3 slots leaving the 4th black slot empty for b...
    anilnc
    last modified by anilnc
  • Issue with new DH61AG ECS G24 Flat Panel Compatiblity

    Just purchased a new DH61AG to replace my ECS G24 Aura AIO w/3770s and 16 GB Ram and SSD (H61H2-TI fried) Was running Win10 Pro x64, updated new board to BIOS 109 (was 40), selected "ECS 21" in AIO BIOS dropdown menu,...
    Chucker18
    last modified by Chucker18
  • S5000XVN + x5470?

    Hey! Will this S5000XVN motherboard work with a x5470 processor? I know that there is no such processor in the manual, but I saw several users with such configurations (look at the screenshot), maybe in the manual t...
    Kasvlad
    last modified by Kasvlad
  • where can i find a bios recovery for a Intel® Desktop Board D915PLWD

    my computer is stuck in a loop it boots up says there is an error usually 106 hit f4 to configure bios settings.  after I configure the settings (no matter how I set them) I save and then the loop starts over
    IAMBEANE
    last modified by IAMBEANE
  • Dg35ec motherboard with core 2 duo

    Dg35ec motherboard.     I bought new Two 2gb ram.  i already have Two 2gb ram installed.    once install new Two 2gb ram, computer becomes too slow.   i have 4 slot. ( 2gb+ 2gb ...
    Kris32
    last modified by Kris32
  • DQ670W motherboard gives 1 beep but screen is blank. Is Mobo dead?

    Hi, I'm running a DQ670W motherboard with a i5 3470 cpu. I have 2x2gb 1333Mhz ddr3 Hyperam and a 4gb 1333Mhz ddr3 Transcend. I tried each ram stick separately and all I get is a single beep but no screen display. BLAN...
    TheNewGuyFrom84
    last modified by TheNewGuyFrom84
  • Please help me with backup of the bios of motherboard intel extreme

    No matter if it is dz dx dp need a backup .bin
    Mavc@29
    last modified by Mavc@29
  • DZ77GA-70k, ACPI Suspend State missing from UEFI BIOS power menu, need help

    So after transferring my PC from one case to another, the ability to sleep my PC in windows disappeared. Doing pwercfg -a in command prompt got me a very odd response:     So this pointed me to BIOS inste...
    Helgaiden
    last modified by Helgaiden