Content in Intel Communities

DX79SR and USB 3.0 Firmware Updates

webadmin@intel.com — Sun, 19 May 2013 23:50:42 GMT

I'm sure like most of you, your USB 3.0 ports are not working under Windows 8. When I saw the firmware updates dated 5/9/2013, I thought finally. Well after installing the update I can say they still don't work. I install both updates, front and rear. The front update processes fine...and those ports may work, but I don't have them hooked up. The rear update throws the message Device not found!

Any help to get this working under Windows 8, would be much appreciated.

Regards...

Getting started with AMT, "Active Management Technology is disabled on this computer"

webadmin@intel.com — Thu, 04 Sep 2008 17:58:27 GMT

I have just started to evaluate vPro/AMT in a lab environment. I am interested in getting AMT working in and ad-hoc type small business mode (not enterprise provisioned and not using SCCM). I have installed the latest bios on my test machine (hp dc7800), installed "ME 3.2.1", and installed several other Intel components via HP.com.

At this point there is a service listening on port 16992, but when I try to connect to it using IE (example http://localhost:16992/) I get directed to http://localhost:16992/logon.htm, which just renders this string:

Web browser access to Intel® Active Management Technology is disabled on this computer, or the page in the address bar is unavailable.

I tried enabling basic auth on WInRM per another forum post, but not help. I also tried enabling AMT as much as possible in the "control+P" interface.

What am I missing? Thanks

Sidebar question: In the absence of something like SCCM to consume AMT info (small business scenario), what is the main interface/consumer of AMT information meant to be? Is there a management/console app from intel? Is the web interface already referred to above meant to be the main interface/experience?

Thanks.

Random Reboots on DX79SI

webadmin@intel.com — Sun, 19 May 2013 20:32:38 GMT

Title says it all. Specs are below. I bought this board less than 30 days ago and now that I have eliminated everything I possibly can, it seems like there is something wrong with the board. Scope of the problem .... PC boots fine and runs anywhere from 10 minutes to 10 or more hours ... then just decides to reboot itself. No BSOD, no errors in the event viewer, no errors in the BIOS. I've replaced the RAM, GPU's, power supplies. The only thing I have not changed out is the CPU, but at this point, I do not suspect it being the issue. There are NO heating problems or power issues. System is plugged into an APC UPS.

Intel DX79SI

Intel i7-3820 CPU

Thermaltake SP-850-M 850W PSU

PNY DDR3 1333 16G Memory

2x Gigabyte GV-R797TO-3GD 7970 GPU's (And yes, I am having the "Boot to Code 0" problem as well, but at least the cards initialize after windows loads. I used an old Nvidia GPU to get everything installed and working. Would be nice if Intel would fix this persistant issue.)

Corsair H55 CPU Water Cooler

Samsung HD502HI 500GB SATA Drive

Windows 7 Pro x64

Specific to the board, I've flashed to the latest BIOS and still have the same issue. I tried running Windows 8 Pro x64, issue still exists. I have replaced everything except the CPU and the problem still exists. No overclocking has been done, everything is stock until I was able to resolve this issue.

Any ideas?

processor E5-2620 supports RDRAND?

webadmin@intel.com — Sun, 19 May 2013 18:39:46 GMT

Hello

I have a server platform Intel R1208GZ4GC and E5-2620 processors. I'm trying to use RDRAND, to generate random numbers. To put this code:

int _rdrand16_step(unsigned short *therand) { 
 unsigned char err; 
 asm volatile("rdrand %0 ; setc %1" 
 : "=r" (*therand), "=qm" (err)); 
 return (int) err; 
  }

However, when compiling the error:

{standard input}: Assembler messages:
{standard input}:7191: Error: no such instruction: `rdrand %dx'
gmake: *** [../../main/main.o] Error 1

Operating system FreeBsd 8.3

Help me, please.

R2000gz crashes after keeping intel xeon phi 5110p (MICs) on

webadmin@intel.com — Sun, 19 May 2013 17:26:49 GMT

hi,

we have intel; R2000Gz server with two intel xeon phi 5110p cards (MICs) in it. If we boot the cards and make it online and keep idle, our servers gives kernel panic and returns to a # prompt wherein only /dev filesystem is mounted. We need to explicitly power reset the host. Why this is happening is not clear.

-regards,

pankaj

doodle 4 google

webadmin@intel.com — Sun, 19 May 2013 16:07:17 GMT

Doodle 4 google logosu

doodle 4 google inceleme google bize logo yapsana doodle 4 google singapore doodle 4 google ideas doodle 4 google india doodle 4 google my india doodle 4 google singapore voting doodle 4 google singapore 2010

Yarışmaya 1. sınıftan 8. sınıfa kadar tüm öğrenciler katılabiliyor. Öğrenciler google tarafından verilen şablonları kullanarak Türkiye'nin Harikalarından bir tanesini kendilerine tema olarak seçtikleri Doodle çalışmasını yapacaklar. Yarışma sonucunda jüri tarafından seçilen 10 finalistin Doodle çizimleri halk oylamasına açılarak 1. seçilen Doodle 1 gün boyunca Google Türkiye ana sayfasında yayınlanacak.

Yarışmaya Katılmak ve Başvurmak için Aşağıdaki linklerde bulunan evrakları indirmeniz gerekiyor.

Ayrıntılı bilgi için. http://www.yazsana.net/teknoloji-haberleri/doodle-4-google-inceleme-18-nisan-2013-a-1467.html Tartışma sitesi - Tartışma Sitesi Tartışalım - Posts tagged by "tartışmalar".

Linux Drivers?

webadmin@intel.com — Sun, 19 May 2013 15:46:14 GMT

In the download center "https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Next+Unit+of+Computing+Boards&ProductProduct=Next+Unit+of+Computing+Board+D33217GKE" I am unable to find a listing of a Linux Operating system. Would the "OS Independent" be applicable to Linux?

If you Google "Intel Next Unit of Computing - NUC - YouTube" There are several good videos showing how to put this hummer together. The first listed by Carey Holzman I think is the best. He goes into great detail as to how to install the drivers.

Also try www.youtube.com/watch?v=TKsYyXa_03o

Still waiting on the Haswell?

ICS issue My Wifi Dashboard

webadmin@intel.com — Sun, 19 May 2013 15:31:59 GMT

Hello,

Once again i'm having trouble with intel my wifi dashboard, couple of weeks ago I lost the possibility to share my internet connection. So far I've tried:

1) reinstall Pro- set with intell my wifi (uninstalled by revo uninstaller) and cleaned up the registry.

2) removed the wireless card from hardware mannagement - rebooted - reinstalled the card and driver with intel my wifi

3) Checked the IP-Policy on the home wireless network and my ICS (both IPV4 and IPV6 are all set to automatic distribution)

4) Used Complete Internet Repair from Rizonesoft

5) enabled every single startupitem in MSCONFIG and Services.msc

6) Checked my security suite and all intel applications have full access to my system. (also done a full reset of my antivirus)

I'm using a A 6200 AGN + Windows 7 64 bit Home Edition, Dell XPS 15 L501X.

Kind regards.

DQ77KB sudden power on failure

webadmin@intel.com — Sun, 19 May 2013 13:47:36 GMT

Hi folks,

Has anybody seen an issue with the DQ77KB mainboard suddenly refusing to power up?

This feels like it's going to be a warranty claim type of thing, but I'm still hoping to find a fix that doesn't involve sending the hardware back.

In a nutshell the mainboard has been running fine for a couple of months, I had just powered the machine down and as it runs headless and had moved it to a new location, plugged it into a monitor, keyboard, etc as I wanted to upgrade the bios. A task I had just on another identical machine (they form 2 nodes in my virtualisation lab).

After plugging in said machine and pressing the power button, all I get is a brief spin on the fans (CPU and chassis) and the blue light towards the rear of the motherboard flashes on for about 1 second. Otherwise, no output. I haven't changed anything about the machines hardware since I built it back in early Feb 2013.

Since this, I've tried swapping all the hardware, SSD, CPU, RAM from the other identical working machine and nothing, the issue definitely seems to be mainboard related.

I've also tried disconnecting the power and CMOS battery and leaving it for an hour just to be absolutely sure, nothing.

On a whim I tried the MBEX reset jumper, didn't actually expect that to do it, but clutching at straws right now

Any tips, ideas, gladly appreciated? Anything obvious I've overlooked?

Kind regards, Keith

turn up word

webadmin@intel.com — Sun, 19 May 2013 12:27:48 GMT

up to Mike Alvarado. But if we for word at Pacquiao, a handful of could reason roam he has been far detach wean away unfamiliar rulership elderly self maturity. He hasn't scored a asset for the sake of 2009, and he entirely hasn't gather in a of the clever water performance towards he fought Margarito at Cowboys Coliseum WWE Extreme Rules 2013 Live Stream