Hi there,
Please see the link below:
The memory needs to have these requirements, Intel has tested and validated some of the memory. If you are buying a memory that is not on the list, you will need to make sure that memory meets the reuirements below.
System Memory Features
The boards have four DIMM sockets and support the following memory features:
http://www.intel.com/support/motherboards/desktop/d915gav/sb/CS-027070.htm
Hope this helps a bit.
All the best,
Regards,
Aryan
Dear sir,
Thank you for your reply. I can't understand about that. I haven't good knowladge regarding this. Previously I told you that my mother board is INTEL 915GAV. It is not 915GAV. It is INTEL 915GEV. I have get a report regarding my computer details using CPU-Z programe. If you have free time please check that one.I have attached with this post. I think you can understand about my computer and you can give answer about my problem.
Always my system properties displayed I have 1.25GB memory. But I'm not sure both rams are working properly. Now I have installed Windows 7. I want minimum 1GB memory. Because I want to check whether this RAMs are support or not with this Mother board.
Thank you.
Regards,
Lahiru
Memory SPD DIMM # 1 SMBus address 0x52 Memory type DDR2 Module format Regular UDIMM Manufacturer (ID) Kingston (7F98000000000000) Size 1024 MBytes Max bandwidth PC2-5300 (333 MHz) Part number 9905316-005.A04LF Serial number 65230452 Manufacturing date Week 26/Year 07n Number of banks 2 Data width 64 bits Correction None Nominal Voltage 1.80 Volts EPP no XMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 3.0-3-3-9-12 @ 200 MHz JEDEC #2 4.0-4-4-12-16 @ 266 MHz JEDEC #3 5.0-5-5-15-20 @ 333 MHz SPD registers 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00 10 0C 04 38 01 02 00 03 3D 50 50 60 3C 1E 3C 2D 80 20 20 27 10 17 3C 1E 1E 00 00 3C 69 80 18 22 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 72 40 7F 98 00 00 00 00 00 00 05 39 39 30 35 33 31 36 50 2D 30 30 35 2E 41 30 34 4C 46 00 00 00 07 26 65 60 23 04 52 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 C0 00 00 00 00 00 00 00 00 2B 00 00 00 00 00 00 00 D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F0 39 39 30 35 33 31 36 2D 30 30 35 2E 41 30 34 4C DIMM # 2 SMBus address 0x53 Memory type DDR2 Module format Regular UDIMM Manufacturer (ID) Kingston (7F98000000000000) Size 256 MBytes Max bandwidth PC2-4300 (266 MHz) Part number Serial number 8525EF2A Manufacturing date Week 23/Year 06n Number of banks 1 Data width 64 bits Correction None Nominal Voltage 1.80 Volts EPP no XMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 3.0-3-3-9-12 @ 200 MHz JEDEC #2 4.0-4-4-12-16 @ 266 MHz SPD registers 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 80 08 08 0D 0A 60 40 00 05 3D 50 00 82 10 00 00 10 0C 04 18 01 02 00 01 50 50 00 00 3C 28 3C 2D 40 20 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 C7 40 7F 98 00 00 00 00 00 00 01 00 00 00 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 06 1D 85 60 25 EF 2A 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 C0 00 00 00 00 00 00 00 00 2A 00 00 00 00 00 00 00 D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F0 39 39 30 35 32 37 33 2D 30 30 33 2E 42 30 31 4C
Hello,
Well there are several ways to identify the board correctly:
1. Identify it physically - check the aa number and serial number. or Identify it from the bios.
2. Use this Intel Tool
3. Install the Intel Desktop Utilities
Assuming that the board is D915GEV,
System Memory Features
The board has four DIMM sockets and supports the following memory features:
You can see that the board supports DDR2 533 or 400 Mhz only.
So the KVR667D2N5/1G is not officially supported.
You can verify the tested list by Kingston on this link
As a reference for you:
PC2 3200 = DDR2 - 400
PC2 4200 = DDR2 - 533
PC2 5300 = DDR2 - 667
PC2 6400 = DDR2 - 800
All the best,
Regards,
Aryan
