Intel Centrino Advanced-N 6200 AGN device will not start (Code 10)

[idata]

I have a Dell Latitude E6410 laptop which has a built in Intel Centrino Advanced-N 6200 AGN wireless network adapter. Until last week it had been functioning normally, however now it will not start and gives me an error code 10. I have tried checking that the drivers are up-to-date and even uninstalled and re-installed it, but I still get the same error code. To my knowledge I have not done anything to alter the function, though some automatic update may have occurred without me knowing. Has anyone got any suggestions on how to fix it or experienced the same problem?

Thanks

[idata]

Hello

I understand that you have questions in regards the Intel® PRO/Wireless 6200 ABG Network adapter.

On this case I suggest you to download and install the latest driver for your wireless card, the latest driver for adapter can be found at the following link:

http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+Centrino%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+Centrino%C2%AE+Advanced-N+6200&ProdId=3407&LineId=1784&FamilyId=1783 http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+Centrino%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+Centrino%C2%AE+Advanced-N+6200&ProdId=3407&LineId=1784&FamilyId=1783

I suggest you to try this step first, if the issue persist it is possible that you have a hardware issue, I suggest you to contact the OEM manufacturer for further assistance.