Server Products
Data Center Products including boards, integrated systems, Intel® Xeon® Processors, RAID Storage, and Intel® Xeon® Processors
4761 Discussions

S5000PSL hard drive issue.

idata
Employee
1,094 Views

Ok, so I got my last issue with Grub fixed, now I have another issue, I reinstalled linux using LVM, seems once I make the LVM, and assign it a volume group and volume containers, when I reboot, at the first screen It shows me the hard drives, but once I set a LVM they go to 'disk verification failed' . Now I can boot my usb key format the drives out and it will identify them properly, I've tried different ports for the drives and no change, So I formatted them out to ext2/JFS/XFS partitions respectivly, updated to a 3.1.0 kernel and the same issue with the LVM becomes present once again even though I have not made a LVM, i reboot and voila 'hard disk verification failed' these are two brand new identical 320GB drives. I'm kinda stuck here as google gives no information on the issue, other then to 'reset the cpu's into there sockets' which I think wouldn't do a darn thing for me.

Board Identifcation

System Bios: V S5000.86B.10.00.0081

Build Date: 08/17/2007

Board Part Number: D44771-805

Board Serial Number: QSSL73201090

System Part Number: C2001

System Serial Number:A0047780

Chassis Part Number:C2001

Chassis Serial Number:C2001

BMC Firmware Revision: 0.59

HSC Firmware Revision: 0.00

SDR Revision: SDR Package 42

UUID: D3E6ED81479811DCAF6A00151730A1D4

BIOS Information

 

Vendor: Intel Corporation

 

Version: S5000.86B.10.00.0081.081720071348 <-- I updated this and it wont allow me to access it any more it drops me to efi shell =[ <p>  Release Date: 08/17/2007

 

Address: 0xE8000

 

Runtime Size: 96 kB

 

ROM Size: 4096 kB

 

Characteristics:

 

PCI is supported

 

PNP is supported

 

BIOS is upgradeable

 

BIOS shadowing is allowed

 

Boot from CD is supported

 

Selectable boot is supported

 

EDD is supported

 

Print screen service is supported (int 5h)

 

8042 keyboard services are supported (int 9h)

 

Serial services are supported (int 14h)

 

CGA/mono video services are supported (int 10h)

 

ACPI is supported

 

USB legacy is supported

 

LS-120 boot is supported

 

ATAPI Zip drive boot is supported

 

BIOS boot specification is supported

 

Function key-initiated network boot is supported

 

Targeted content distribution is supported

 

BIOS Revision: 10.0

 

Firmware Revision: 0.0
0 Kudos
0 Replies
Reply