to learn more about robd, share content, and exchange messages and invites.
Not a member? Join Now!
to create and rate content, and to follow, bookmark, and share content with other members. Not a member? Join Now!
Just some positive feedback for you. The latest audio driver 188.8.131.5210 has fixed a loud pop from the speakers when the driver loads. Thanks, it was driving me mad!! Apart from previously mentioned bi... DX79SR latest audio driver fixes loud popBack If you start the computer, then before the first bios screen appears, press and hold the power button to force the computer off, the computer will power down, but then a few seconds after the fans have stopped spinnin... DX79SR powers on again after forced power offBack Have just discovered that if I have my Cinergy 2400i tuner in the x1 slot, that it is no longer present in device manager after I resume from sleep. I have to restart the computer to get the card to show in device ma... DX79SR tuner missing [x1 slot] on resume from sleep - ok in 3rd peg slotBack The setup: Cpu - i7 3960x ram - 32gb [4 x 8gb] G.skill 2400 vga - Gigabyte GTX 680 hdd - 2 x 2tb Seagate on grey marvell ports dvd drive - Lg BD on black intel port bios - 0525 - set to defaults except uef... DX79SR can't install win 7 X64 to a raid volume on the marvell chipBack I've found that when installing the usb3 drivers to a Win7 x64 installation, that the installer sits for ages at 100% because even though the drivers did install, they could not start. Eventually after a few minutes ... DX79SR USB3 driver install problemBack Have just stumbled on this issue. With just a usb2 keyboard attached to rear usb2 port [no/any hdd config], a single press of F2 when prompted will get bios - all good. But, if I also attach my usb2 card reader to a... DX79SR difficult to get F2 bios with usb2 card reader attachedBack Following on from my other hang at 5A thread regarding this issue, I have stumbled across other combinations that also hang at 5A that do not involve a usb hdd or the DiNovo k/b - mouse dongle. In fact in these combin... DX79SR hang at 5A - more developmentsBack This hang is 100% repeatable, but here's the wierd part. It does not happen if I also have my multi card usb flash reader plugged in as well, with or without a card in one of the slots. This is using the rear i/o blac... DX79SR hang at 5A with usb 2.5" sata hdd plugged inBack My first foray into the world of ssd - Intel 520 240GB.........wow!!!.......[drool]. First time I've ever experienced a machine where I was the bottleneck!! DX79SR with Intel 520 ssdBack Have just noticed that when changing the hdd boot order in advanced view, that the change is not carried over to normal view ?? The reverse is also true, what you do in normal view is not carried over to advanced vi... DX79SR odd bios boot order - advanced v. normalBack Have not been able to pin down any pattern to this issue. It's happened 4 times so far. Please post here if you've had a E7 hang on any of the DX79 boards. DX79SR intermittent bios hang at E7Back Hi all, after reading about 'bricked' boards here, I've done a carefull read of the methods of flashing offered by Intel and have noted that the path one should follow or the best method to use may require some carefu... Flashing the bios on a Intel board - preferred methods and fine print!Back The issue: The usb keyboard cannot wake the computer from sleep unless hybrid sleep is disabled in ctrl panel power options. Have tried all possible configs of raid, single drive, win7 x86 sp1, x64 sp1, driver insta... DX79SR usb k/b cannot wake computer from sleep with boot hdd on marvellBack Have noticed that the bios will hang on code 5A during post with a 2.5" usb hdd plugged in. The hdd works fine at the desktop and does not cause any other computer I have to hang. Anyone else observed this somewhat m... DX79SR bios 0525 hang with usb hdd plugged inBack