to learn more about edwardzh, share content, and exchange messages and invites.
Not a member? Join Now!
Ensure the CPU fan heatsink is properly installed. If it still doesn't fix the issue you may need to get the board replaced.
This chassis does not support S1200BTL. See the chassis Spares, parts list and configuration guide for details.
Because different boards/CPUs have different power requirements. You may try a different board, but I'd still say power supply is most likely the cause of the issue.
Unfortunately AXXRPFKSSD2 is not compatible with RS2BL040. Hope this helps: http://www.intel.com/support/motherboards/server/sb/CS-033095.htm
This tool may help you to get the correct driver: http://www.intel.com/support/motherboards/server/sb/CS-030283.htm
Which driver did you install? If I'm not wrong ESXi 5.1 has built-in RSTe driver. No more hardware/BIOS configuration should be necessary. Check this one:…
Again CPU1 is getting hot. I would double check the installation of the heatsink, and make sure the air flow is not blocked by anything. Pay attention to cable routing - no cable should go between…
Integrated graphics only works when your CPU has a graphics core. For more technical details, see Technical product specification, section 2.6. For a list of supported CPUs that has graphics core,…
Yes the RAID module RMT3PB080 is compatible with S1200BTLRM... Did you try different slots? Did you disable Quiet Boot in BIOS?
When you say "virtual servers", what exactly do you mean? Is it running virtualization? As for remote KVM, which browser are you using, and do you have latest JAVA installed?
See the following PCN: 107724-00
如果我没记错的话，这一代的产品，如果刷FRUSDR的时候机箱选"Other"，风扇就是全速运转的。如果要改变风扇转速，需要手动修改SDR文件。具体作法可以参考此贴： http://communities.intel.com/message/93150#93150 另外，你的机箱一个风扇都没有吗？
edwardzh's Most Liked