Login
to learn more about Grant, share content, and exchange messages and invites.
Not a member?
Join Now!
Log in to create and rate content, and to follow, bookmark, and share content with other members. Not a member?
Join Now! I want to purchase an RMS25KB080 or RMS25PB080 or something inbetween. There is a $300 gap between the two prices. I need some performance info ( like you gave me & everyone else by publishing on the new E5 proce... Where can i find performance info new raid controllers RMS25 series??
in Servers
BackI recently purchased an Intel RAID controller LEDs RS2SG244 and called the office of the controller jumpers (jumpers J1B1, J4A4 and J4A5). The manual says that it is only to connect the LEDs in jumpers that in case of... Question Controller Intel RS2SG244 not lit LEDs in case of failures
in Servers
BackHello, I have some trouble with the PCI slot of a S1200BTS server board. The BIOS did not assign an IRQ to this slot. I checked with four different PCI cards(audio, ethernet, ISDN, X.21): Each of them shows t... IRQ for PCI slot unassigned for a S1200BTS
in Servers
BackI appear to have the problem as described in Intel Solution ID: CS-031086. Windows installs but does not recognise the on-board NICs. My environment is as follows Intel board S5520SC in Intel chassis Windows 2008 R2 w... Hello, First off, feel free to move this topic if it's in the wrong section. Now, the issue: I've had two S1200BTL boards so far and both excibit the same rather odd behaviour. It will restart ... Hi, My system based on S5520SCR don't boot after I change video card. Appear to me amber LED solid.. no video, none mode to access BIOS or regain control, no alert(nothing) I've test... i have an s5520hc board, server tarox parx 5000 g3. with an adaptec 5805 sas sata contoller. installed an sbs2008 with hyper-v role. when i start the instanz, with acess to the cdrom , the whole server crased in a blu... When i will start my hyper-v instanz with access to the cdrom the whole server crashes with bluescreen. anybody know an issue. Tarox parx 5000 with S5520HC an SBS2008 Hyper-v role
in Servers
BackLast week I was experimenting with a Dell Optiplex 960 making RAID configurations. On a 2-disk system I found it relatively easy to use Intel's Matrix Storage Manager in the BIOS to configure two volumes (virtual disk... Hi Everyone, I accidently pulled out a drive while it was powered up. The error I get each time I power up now is "A Drive in RAID0 volume is failing. Try to backup data immediately." My understandi... Hi, Has anybody tried the S3210SHLC motherboard with VMware ESXi4. It seems that the 82566DM network card is not supported. But there is contracdictory information about the 82541PI. The VMWare System HCL does... Can someone please tell me what to check next. I've had my S5520SC system working, on and off, for a week now. Today it turned into a brick again. I was running the Intel RAID Web Console 2 application...
