Home > Intel Communities > Support Community > Desktop Boards > Discussions
Previous Next Up to Discussions in Desktop Boards
1 Replies Last post: Jun 29, 2009 8:26 AM by unplugged_24  
gormanly
gormanly
2 posts since
Jun 29, 2009  
Currently Being Moderated

Jun 29, 2009 3:34 AM

DX58SO BIOS ISO 4121 fails

So, BIOS update from bootable media fails on my new DX58SO using a Samsung SH-S223Q/RSMN 22xDVD±R optical drive.  Error message below.  Any suggestions?

 

  (c) 2001-2002  by Burt Lagerweij

  Drive FE returns 0000h bytes per Sector.

  Driver not installed

CD-ROM XMS/386 read cache, E. Auer <eric@coli.uni-sb.de> 2001-2004

License: GPL 2.                      For standard CD-ROM device drivers.

Cannot open client CD-ROM device driver "CDROM001".

CDRcache will not stay resident.



FreeCom version 0.02 pl 3 XMS_Swap



SHSUCDX Version 2.1a

(c)John H. McCoy, October 2000, Sam Houston State University

   Jason Hood, October 2003. http://shsucdx.adoxa.cjb.net/


Can't open CD driver CDRCACH

  SHSUCDX can't install.

ERROR: Failure loading; unable to find CD-ROM drive!

ERROR: If you have multiple CD-ROM drives, please remove the other

ERROR: CD-ROM discs and try again.  Otherwise your disc may be corrupt

ERROR: or the CD-ROM driver does not correctly support your system.

ERROR:

ERROR: Please reboot your computer now.


_

Average User Rating
(0 ratings)




unplugged_24  
unplugged_24
195 posts since
Apr 21, 2009
Currently Being Moderated
1. Jun 29, 2009 8:26 AM in response to: gormanly
Re: DX58SO BIOS ISO 4121 fails

Hi there,

 

This does seems quite weird but may happen. Never knows, these are logics.

 

Anyway, if this method has failed, please can you try using a different method.

 

You can try either:
i) the iflash method by using a Bootable USB pen drive
or
ii) the recovery method using a normal non-bootable USB pen drive

 

Download the corresponding bios update: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&Inst=Yes&ProductID=3018&DwnldID=17746&strOSs=38&OSFullName=OS%20Independent&lang=eng

 

Follow the instructions on the readme file to be able to do the bios update by these method successfully: http://downloadmirror.intel.com/17746/eng/BIOS%20Update%20Readme.pdf

 

Please note: Using the recovery method you need to remove the BIOS jumper and then do the bios update, then after update power off the system when prompted, put the jumper back to the normal position and then start the system.
Also, for the receovery method, only the downloaded .BIO file should be on the media (nothhing else).

 

Location of bios configuration jumper can be found on the motherboard manual: http://downloadmirror.intel.com/17746/eng/BIOS%20Update%20Readme.pdf

 

Hope this will be helpful.

 

Cheers.

Report Abuse

More Like This

  • Retrieving data ...