Hi there,

Try a bios recovery using a formatted USB media.

Instructions for Recovery BIOS Updates

Recovery with Formatted USB Stick

1. Copy the recovery file (*.bio) to a formatted usb disk.

http://downloadcenter.intel.com/T8Clearance.aspx?sType=&agr=Y&ProductID=2064&DwnldID=17290&url=/17290/eng/NT4119P.BIO&PrdMap=&strOSs=101&OSFullName=RedFlag*Linux*Desktop4.1&lang=eng

2. Place the usb disk in the target system.
3. Shut down the system and unplug AC power.
4. Open the chassis and remove the BIOS Configuration Jumper. See the Technical Product Specification for details including the location of this jumper.
5. Power the system on.
6. Wait 2-5 minutes for the update to complete. When the usb drive LED is lit, the system is copying the recovery code into the FLASH device.
7. System will either turn off when the recovery process is completed or it will prompt you to turn off the system.
8. Remove usb disk
9. Replace the BIOS Configuration Jumper.
10. Restart system.

Note: these can be found on:
Website: http://downloadmirror.intel.com/17197/eng/BIOS%20Update%20Readme.pdf
Page 3

All the best,

Regards,

Aryan

FYI - I have the exact same problem doing the exact same update with the exact same board.  BIOS update procedure hangs immediately after the message "Flashing image for lan ..."  The next text message should pop up and say [done] but it never comes back - the board just hangs right here.  I have tried both the bootable ISO CD method and the Revovery method using a Floppy with the .BIO file.  Both result in the same hang.  Current system BIOS is the same as the previous user stated above - 4092.  Thanks.

Hi; I had the same problem exactly and tried to down-flash to 1788 so I could upgrade to 4119 but it wouldn't take. So still stuck at 4092.