Most likely it's related to this issue: Slow system response with Windows 2008 R2* or Windows 7* and embedded NIC driver.
The NIC problem is OK now, But I have an other question for my system. When I finished install the win7 64. I run the Win7 performance index, when it goes to check CPU performance, the system power off and reboot suddenly,I had tried several times and the appearance of things same, I used the AIDA64 check the CPU with CPU Zlib , CPU AES and CPU HASH the same problem occur. Can you help me ?
I would check power first. What kind of PSU/chassis are you using?
Seems it should do... Would you test with minimal configuration first (one CPU, one DIMM) and add one component at a time? That should help you to identify the faulty part. Also a fresh OS installation is recommended.
Hey Edward , I found my motherboard has some problem. There's no BMC firmware version,HSC firmware version and SDR revision, it displayed: 0.0 0.0 and - -. I can't update it with the EFI bootup.
What error did you get when updating the BMC? You may try the Force BMC update procedure as documented in the board Technical product specification section 7.2. If it still fails, get the board replaced.
Dear Edward,
Thank you for your advice! You are right. My upgrade BMC firmware Procedure: Jump the BMC force update to enable(2-3),then Run BMC34 in EFI boot environment,power off then Jumper jump to disable ,run
BMC40,and Upgrade to the Newest firmware.
I found why my system can't pass the Win7 performance index and the Aida64 cpu test, When use the bios option:
advance ->processor configuration ->core multi-processing ->ALL, The problem will occur,change the option to 1 or 2
will work !
So BMC is working now? Did you try only one CPU with core multi-processing set to All?
BMC is woking now. I tried 1 CPU for the system with core multi-processing set to All today, It's work normaly.
And before that , I reinstall the win7 system, I t still had problem with 2 CPU. Edward , can you help ??
What's the problem with 2 CPUs? Still reboot during performance test? Did you try both CPUs one at a time in Slot 1?
Yes, Still reboot during performance test with 2 CPU. Both CPUs one in slot 1 work fine.
