Intel Rapid Start Technology

Randy Jun 4, 2012 1:37 PM

Currently Being Moderated

I get the error: this computer does not meet the minimum requirements for installing the software

Although I have the following hardware:

Intel Core i5 3550 @ 3.30GHz Ivy Bridge 22nm Technology

ASUSTeK COMPUTER INC. Model SABERTOOTH Z77 (LGA1155)

OCZ-VERTEX2 60GB SATA II SSD

Running MS Windows 7 Home Premium 64-bit SP1

as far as I can tell, it should work. This is a new system, I built it on Friday (June 1st) so there may be a SATA driver issue or something. I sure hope I don't need a SATA III SSD, i that is the case, I can do without it

1. Re: Intel Rapid Start Technology

Randy Jun 16, 2012 10:15 AM (in response to Randy)

Currently Being Moderated

bump
Report Abuse

Like (0)

Translate
2. Re: Intel Rapid Start Technology

Frank Jun 17, 2012 9:09 AM (in response to Randy)

Currently Being Moderated

Did you setup the special partition on your SSD that is required for Intel Rapid Start yet? I also found that a bit confusing, you first have to setup that special partition (partition size=RAM size) and after that you can install the Intel Rapid Start software. Check your mainboard manual if it contains any instructions for that, the partition needs some special type.
Report Abuse

Like (0)

Translate

Go to original post

Actions

Legend

Correct Answers - 4 points
Helpful Answers - 2 points