DH77EB: fans 100% after resuming from S3

alfredo_1971 May 10, 2012 4:02 AM

Currently Being Moderated

Hi all,

I've just bought a DH77EB, flashed to BIOS Version 0062. All works as expected, but if I turn system into suspend-2-ram (S3) and resuming it, all fans are running at 100% speed. BIOS Setting is 20%, which work fine on cold boot.

Second little glitch is that Power-LED is still on in S3 even though configuration in BIOS is turned off.

Is there probably a new BIOS available which fixes this issue, or am I missing something?

Thanks in advance

Alf

1. Re: DH77EB: fans 100% after resuming from S3

Victor_Intel May 11, 2012 4:31 PM (in response to alfredo_1971)

Currently Being Moderated

Hello alfredo_1971,

Currently you are using the latest BIOS available, but hopefully a newer BIOS update will be released soon.

I'm sorry for your inconvenience on this matter.

Regards.

PV
Report Abuse

Like (0)

Translate
2. Re: DH77EB: fans 100% after resuming from S3

phil_l May 12, 2012 1:34 AM (in response to alfredo_1971)

Currently Being Moderated

Hi

I had a similar problem with the fans when I updated the BIOS on my DZ77BH board. It wasn't until I went it into the classic mode BIOS page and did a reset to defaults did the fans start behaving. Might be worth trying that although you will need to set back anyother changes you made.

Regards

Phil
Report Abuse

Like (0)

Translate
3. Re: DH77EB: fans 100% after resuming from S3

alfredo_1971 May 19, 2012 10:09 AM (in response to alfredo_1971)

Currently Being Moderated

Latest BIOS (0071) fixes this issue!
Report Abuse

Like (0)

Translate

Go to original post

Actions

Legend

Correct Answers - 4 points
Helpful Answers - 2 points