S1200BTL Configuration for Raid + Storage

rgonzales562 May 9, 2012 2:11 AM

Currently Being Moderated

Hello,

I just set up a raid configuration on my S1200BTL but i cant see my internal 1TB storage drive. Bios does see it but Windows Disk Management does not. I figure theres a setting in bios that i need to set or a driver i need to update/install. Any help would appretiated.

Set up:

Xeon 1235

4X4GB Ram

4X320GB Raid 0 (Using on board raid)

1. Re: S1200BTL Configuration for Raid + Storage

edwardzh May 9, 2012 2:16 AM (in response to rgonzales562)

Currently Being Moderated

If you're using ESRT2, and you have add a new SATA drive, you'll need to create a RAID 0 VD using that single drive before OS sees it.
Report Abuse

Like (0)

Translate
2. Re: S1200BTL Configuration for Raid + Storage

rgonzales562 May 9, 2012 2:43 AM (in response to edwardzh)

Currently Being Moderated

Thanks for the fast response Edward! I went into the Raid Web Console and created a Virtual Disk. After creating it Disk Mangement was able to see the drive.
Report Abuse

Like (0)

Translate

Go to original post

Actions

Legend

Correct Answers - 4 points
Helpful Answers - 2 points