As the Pin maintainers are well aware I tend to notice the occasional typographical error in the technical documentation. I'm doing a close reading of a few chapters of the Oct. 2011 edition of volume 3B and have found a handful that are worth correcting.
Where should these corrections be sent?
As an example:
"Time Window for Power Limit #2 (bits 55:49): Indicates the length of time
window over which the power limit #2 The numeric value encoded by bits 23:17
is represented by the product of 2^Y *F; where F is a single-digit decimal
floating-point value between 1.0 and 1.3 with the fraction digit represented by
bits 23:22, Y is an unsigned integer represented by bits 21:17. The unit of this
field is specified by the “Time Units” field of MSR_RAPL_POWER_UNIT. This field
may have a hard-coded value in hardware and ignores values written by
software." [Vol. 3B, 14-32]
23:22 -> 55:54
21:17 -> 53:49
[I think these are correct --- it's a simple cut 'n' paste error from the #1 case.]