I am setting up a bare bone S5520HC without chasis with non-Intel power supply and that's it. BMC is not used.
It works. But I tried Centos 6.0, Fedora 15, Ubuntu 11.04, Ubuntu 10.x, Centos 5.6, all came up with:
1. lspci -vv | grep -i ethernet
01:00.0 Ethernet controller: Intel Corporation Device 10aa (rev 02)
01:00.1 Ethernet controller: Intel Corporation Device 10aa (rev 02)
2. cannot detect these devices of course hence no eth0 and no eth1
3. tried to download igb-3.0.22 as well as intel-lan_linux_v16.0.tar.gz and tried e1000e, e1000, igb, ixigb.... whatever all won't detect this
4. guess 10aa is not a recognized PCI device ID for these drivers
Any idea? Need to upgrade BIOS?
Did you use the correct tool to install CPU? http://www.intel.com/support/motherboards/server/sb/CS-032587.htm?wapkw=(bent+pin)
Usually happen om CPU insertion when the CPU is slide slightly to the left ot right to get it to drop in.
The gold pins are very soft
one of the more common pins to get bent http://communities.intel.com/message/110489#110489