Wendsday im onsite and give it a go, i really hope it will work!

I'll will post here!

Thanks for the info Jytan!

I think my problem is not due to lighttpd but to ascpolicy service, my lighttpd is working but when I login to IASC I have the menu frame on the left pane but when I click any item the right pane is always white, showing nothing. So looking the messages.log I found these error repeating about every 21 minutes:

kernel: ascpolicy[4691]: segfault at 000000005d305b66 rip 0000000000733078 rsp 00000000f6511160 error 4

Maybe ascpolicy is not compatible with RHEL 5.5 64Bit?

After applying teh patch  still a no go,

Sometimes i can login, and sometimes not...

After im logged on, i see on the left buttons and in the middle of the screen the circle (of the applet) is going round forever and nothing is happening.

Error log from lighttpd:

2010-08-25 16:26:17: (log.c.172) server started
2010-08-25 16:26:17: (mod_fastcgi.c.1365) --- fastcgi spawning local
    proc: /usr/local/asc/bin/php-cgi
    port: 0
    socket /var/run/lighttpd/php-fastcgi.socket-11509
    min-procs: 1
    max-procs: 1
2010-08-25 16:26:17: (mod_fastcgi.c.1390) --- fastcgi spawning
    port: 0
    socket /var/run/lighttpd/php-fastcgi.socket-11509
    current: 0 / 1
2010-08-25 16:26:17: (server.c.951) WARNING: unknown config-key: status.status-url (ignored)
2010-08-25 16:26:17: (server.c.951) WARNING: unknown config-key: status.config-url (ignored)
2010-08-25 16:26:17: (server.c.951) WARNING: unknown config-key: status.statistics-url (ignored)
2010-08-25 16:27:41: (mod_fastcgi.c.2979) got proc: pid: 11512 socket: unix:/var/run/lighttpd/php-fastcgi.socket-11509-0 load: 1
2010-08-25 16:27:41: (mod_fastcgi.c.1492) released proc: pid: 11512 socket: unix:/var/run/lighttpd/php-fastcgi.socket-11509-0 load: 0
2010-08-25 16:27:41: (mod_fastcgi.c.2979) got proc: pid: 11512 socket: unix:/var/run/lighttpd/php-fastcgi.socket-11509-0 load: 1
2010-08-25 16:27:41: (mod_fastcgi.c.1492) released proc: pid: 11512 socket: unix:/var/run/lighttpd/php-fastcgi.socket-11509-0 load: 0
2010-08-25 16:27:41: (mod_fastcgi.c.2979) got proc: pid: 11512 socket: unix:/var/run/lighttpd/php-fastcgi.socket-11509-0 load: 1
2010-08-25 16:27:41: (mod_fastcgi.c.2979) got proc: pid: 11512 socket: unix:/var/run/lighttpd/php-fastcgi.socket-11509-0 load: 2
2010-08-25 16:27:41: (mod_fastcgi.c.2979) got proc: pid: 11512 socket: unix:/var/run/lighttpd/php-fastcgi.socket-11509-0 load: 3

Also found this in the appcore.log file:

#"cr.cpp": 31
Cache River error : The Operation Failed
#"cr.cpp": 31
Cache River error : The Operation Failed
#"cr.cpp": 31
Cache River error : USER Privilege Set failed
#"cr.cpp": 31
Cache River error : Invalid Data.

So unfortunately, per my earlier post, Centos* is not the supported operating system, per this list. Sorry about that.

As for the issue on RedHat Enterprise Linux* 5.5 64-bit, we are unable to replicate your issue. The configuration below is what we used.

Motherboard : S5000VSA

BIOS:98

BMC:64

SDR:42

Board Part Number:D52032-712

OS: RHEL* 5.5 X64

Kernel: 2.6.18-194.EL5 (x86_64)

What specific kernel version is being used for RHEL 5.5 64bit? After installation of IASC, was a reboot done ? How about other packages installed ?

Sorry, but my system is Centos 5.5, (open source version of RHEL) and my kernel is 2.6.18-194.11.1.el5. I also made a reboot but same result. I'm looking to see if I have to update the bios to solve the issue. If the IASC is not compatible with Centos for me could be problematic due to the fact all my servers have  this operating system.

I apologise for the inconvenience, unfortunately Centos* is not currently supported by the Intel(R) Active System Console (IASC), however, if Intel decides to support this in the future builds of IASC, it will be clearly documented in the release notes as well as the user guide.

In other words, if you have CentOS, to bad for you, and no IASC?

While the difference between RHEL and CentOS is minimal.....and should be easy peasy to fix.

I got to know, if its going to be supported or not before i order the rest of the servers for our farm, as you might understand

Hope you can answer that for me.

EUREKA!

After upgrading kernel to 2.6.18-194.11.3.el5 IASC started to work in Centos 5.5 64bit.

Thanks to all.

Nmassi, thank you for letting us know of the workaround. I will pass this along to the dev team.

MB - S3210SH

CPU - E6850

OS - CENTOS 5.5 All Update.

Net - eth0, eth1, lo

Intel ASC - work.

BUT if I on bridge, reboot.

Net - eth0, eth1, lo, br0

ascpolicy - segfault.

IASC - doesn't work.

IASC - work, then no bridge module.