Hi. How to Run AHCI in Windows XP on board DZ77GA-70k.. I have tried to install Intel ® Rapid Storage Technology RAID Driver 11.2.1006 from under Windows XP . Do not put the driver AHCI. All the same as en...
I've been noticing huge FPS drops while playing CS: GO. It stays at 60+ FPS most of the time and suddenly drops to 10-20 FPS and comes back to 60+ after several seconds. I'm not sure why, it would be great if anyone c...
I am setting up an image for deployment and I need a way to have the profile automatically set so that I don't have to hook up a mouse and keyboard on the machine at time of boot. Is there a way to put a batch file in...
Hi. I recently received my NUC and am using it as a HTPC. Now I am wondering if the high CPU temps are normal for this device or if there is something wrong with it. My idle CPU temp (as shown in the BIOS...
I have two Intel® SSD 520 Series (60GB, 2.5in SATA 6Gb/s, 25nm, MLC) installed in RAID “0” on an ASUS P8Z77-V Pro, Intel Ivy Bridge Quad i7 3770K, G.SKILL Trident X F3-2400C10D-16GTX and two HDDs with ...
Hello, I have got in front of me a computer whose behaviour regarding Intel Smart Response Technology puzzles me to no end. The machine in question, a Lenovo IdeaPad U410 (500 GB HDD + 24 GB SSD) running Windo...
Hi - first posting. I've been digging through the forums but not quite finding what I'm looking for. I'm running an Intel DZ68BC board with two Seagate Momentus XT drives in RAID1 for the System...
In a previous article, I discussed Link Preference and how it enables better KVM user experience over wireless. In this article, I will discuss Profile Synchronization, another important capability that makes AM...
Hello, on an Asrock P67 Extreme 6 Motherboard is a RAID5 with 4x1,5TB Harddisks. (W7 Home Pr. 64bit) Unfortunately the CLR CMOS button was pressed while running Windows. Then the system was restarted with wr...
Hello EveryOne, I had to disable Acceleration in Intel Rapid Storage Technology to Change SATA Mode to AHCI inorder to boot RedHat alongside Windows as Linux installation is not supported in mSATA operating mode. Af...
Hey guys, Ok, so not related to an Intel motherboard, rather the intel Chipset/Rapid Storage Technology... So, I recently upgraded to an Asus P8Z77V motherboard with i5 CPU and 8 GB memory. I've got an...
Hi Folks, We are trying to bond two SRIOV VF's (coming out of two different PF's) within a Linux VM in active loadbalance mode using linux bonding driver. This is primarily to have high-availability across the...
In Device Manager, the Renesas Electronics USB 3.0 Host Controller that pertains to the rear USB 3.0 ports has a yellow warning sign with an exclamation character in the middle and the status of the device is "This de...
Hello, i have a problem with a new DQ77CP Mainboard. It came with Bios-Version 0046 and i updated it successfully to 0050. Now every Biosupdate fails. I tried with the F7 BIOS Falsh Update from USB where the...
As the title states the Intel management engine firmware displays 0.0.0.0 it has been displaying this since a bios recovery of the crappy BIOS 0035 when i upgraded to i7-3770 recently, tho the recovery solved my issue...
Hi, Does anybody can help me find documentation regarding the following issue: Customer has an install base with AMT provisioned (admin mode) and managed by SCCM 2007. Know customer wants to migrate to...
I have a DH77DF mini-ITX board running Windows 7 x64, latest BIOS 105, UEFI boot. No problems using Video Optimization when using default Microsoft/Intel AHCI driver for my Intel SSD. Previously Video Opti...
Hi everyone, I have a pc with DH61CR motherboard, i5-2400, 4GB of RAM. Decided to update bios. Working bios was form year 2010. Express bios flash failed few times, with newest, and few earlier vesions. Decide...
I am looking in to using SCS to provision clients for use with SCCM 2012. There are directions here and here on how to integrate that I am researching. I have a couple of questions for someone who has done...
I finally got all of my parts and completed the build and when I turned the computer on I heard 3 beeps (memory problem) and a 32 error code. I got the computer to boot by switching the memory around and by using only...
