Hi, I have the following problem with a DZ77RE-75K / 3770K CPU. The system will restart randomly in any delay between 1 hour and 10 days. I have this problem since I got the board with BIOS less than 61. In B...
Hi everyone, I have an Intel DX79SI and a 3930k CPU on it. I use the Intel Extrem Tuning Utility and CPU-Z to monitor my voltages. CPU-Z seems only to monitor the Core VID, not the Core Voltage. The Extreme Utility ...
I use an HTPC with CetonCorp card for television. I have used the same TV for 7 years. I built a new PC with the Asrock H77 with Intel 4000 graphics / i3 3225. Once I started using the new motherboard, I discovered th...
I have a very noob question on trying to get these two NIC's to team together for link aggregation. I just set up a Synology DS713+ NAS at home and purchased a Cisco SG 200-08 switch in order to use the link aggregat...
Caros amigos, montei um mini servidor com a placa DH 77EB + I7 3770 +4Gb ddr3 1333 + HD SATA 500 WESTERN DIGITAL. Acontece que uso um programa que os outros computadores da rede ao acessar ficam le...
I am running Windows 8 Pro 64 bit on a Lenovo ThinkPad Twist with an Intel Centrino Wireless-N 2230. I have installed the latest available driver v.15.5.6.48 from Intel. I have also downloaded and ...
Hi, I am getting the above message when I try to run the Intel WiDi program. The rest of the message states: This computer is capable of using Intel My Wifi Technology, however a supported version of the softwa...
Hello, unfortunately I have a big problem with the driverpackage for the Intel HD Graphics 3000 on my Zenbook UX31E. I have Windows 7x64 Home Premium but the problem also appears on Windows 8x64 Profes...
Ok i have my vc connected to a vga monitor and a tv via hdmi, the problem is when i turn on the pc the display goes to the hdmi and i want to change it to the vga.
Title says it all. Specs are below. I bought this board less than 30 days ago and now that I have eliminated everything I possibly can, it seems like there is something wrong with the board. Scope of the problem .... ...
I have a DH77DF mini-ITX board running Windows 7 x64, latest BIOS 105, UEFI boot. No problems using Video Optimization when using default Microsoft/Intel AHCI driver for my Intel SSD. Previously Video Opti...
Roberto Diversi, Andrea Bartolini, Andrea Tilli, Francesco Beneventi, Luca Benini Email: {roberto.diversi, a.bartolini, andrea.tilli, francesco.beneventi, luca.benini}@unibo.it DEI, University of Bologna Viale del ...
I'm sure like most of you, your USB 3.0 ports are not working under Windows 8. When I saw the firmware updates dated 5/9/2013, I thought finally. Well after installing the update I can say they still don't...
New BIOS out.
BIOS Version 0057 - GAZ7711H.86A.0057.2012.1024.1317
About This Release:
• Date: October 24, 2012
• ME Firmware: 8.0.13.1502
• Integrated Graphics Option ROM: Build 21...
I just bricked my DZ77GA-70K after the setting some option in my brand new 0057 BIOS... s I'm usually booting using UEFI to Windows 8 system with success, previously with the 0053 BIOS. After upgrade to the ...
Today I found out that I have a motherboard that is 64bit capable, but lacks 64bit GPU drivers. The motherboard is a DN2800MT. After installing 7x64 I was surprised not seeing unidentified hardware (that's a f...
Hi all, I've just bought a DN2800MT to use with my existing TBS6981 dual DVB-S2 card to record TV. Unfortunately the board doesn't boot (no vga output) with the sat card inserted, without it, it's fine. ...
1777 Will the bios used to pass Windows 8 logo validation on the DX79SI ever be made available to the general public? See Desktop Boards — Microsoft Windows* Hardware Quality Labs (WHQL/WHCK) information
dI am connected to a wireless network (at a hotel) and I would like to use my laptop as a hotspot for my phone. I can connect to the wifi network using the laptop and phone directly, although only one connection at a ...
Trying to set up a sys with 32GB RAM. DZ77GA-70K works with only 2 (out of 4) 8 GB Corsair CMX32GX3M4A1600C11 modules of this set in DIMM 3 and 1. With 3 or 4 modules POST stops at 21 or 41. !! Bought these ...
