Hi Folks, We are trying to bond two SRIOV VF's (coming out of two different PF's) within a Linux VM in active loadbalance mode using linux bonding driver. This is primarily to have high-availability across the...
<><> Apologies if this has been posted in the wrong place <><> Ok I'll keep this brief. Problem:- LAN regulary disconnects and reconnets 30 seconds later. Symptons:- Lo...
We am looking for a quad port PCI express card with 100base-FX interfaces, under Windows 7 32-bit. Does the I340-F4 support 100base-FX SFP modules? I am not sure if SFP modules are plug-and-play for different speeds ...
etnerCan any of the following 3 NetEffect 10Gbe Ethernet Adapters that use PCIe v1.1 x8 lane be used on a Dell 2950 II that has PCIe v1.0 with an open x8 slot? I have not been able to find any other 10Gbe network adap...
Hello, I have a 82576 NIC for which I enabled SR-IOV support. All seems to work fine except I want to disable the anti-spoofing proctection (as described here [1]) and the command fails: # ip link set ...
I have a Dell Optiplex with an Intel 82567LM-3 Gigabit ethernet card and using unicast WOL. I have the most recent BIOS with deep sleep disabled and wake from off enabled. The problem is getting the computer to wake w...
We are configuring VFs for our high-volume network traffic, but want to continue to use Linux bridging for other VMs. Is there some configuration we need to do to enable packets from a VF to be switched to a bridge of...
Hello, Config-centric info: Using HP BL460C-G8 and 560FLB (82599 based) NIC. Host and guest OS is RHEL6.4 (latest - 2.6.32-358.2.1.el6.x86_64). Guest is defined SRIOV interfaces, but when booting, the b...
Hi, I have installed x520-SR2 on my Dell poweredge server running ESXi 5.1. I have configured this CNA with software FCoE The driver version on the CNA is ixgbe 3.14.3. How can I find the Firmware version on ...
Hi everybody, we are trying to set up FPP using Intel's 82599EB 10-Gbit/s Cards. Furthermore we are using the ixgbe driver version 3.14.5. I am loading the driver using modprobe ixgbe max_vfs=4,4,4,4 ...
I have a software application that runs on a laptop running Windows 7 SP1 which receives data at around 100Mbps via a UDP stream over a 1GbE connection. I've run the software on multiple laptops successfully in ...
Anyone know if this is possible? I'm trying to get Resonate to work with a new Intel NIC and Resonate's tech support thinks that this feature is why their product isn't working. I'm hoping to avoid going o...
Hello, I am looking for some tech background information about why its not possible to use a x520 card as virtual switch (creating VLAN is disabled as well) that is used for boot from iscsi in hyper-v. is this...
Hi, I've tried to connect my X520-DA2 to a Netgear GS752TXS using a 7m direct attach cable (Cisco SFP-H10GB-ACU7M) but I get no link. I've tried both NIC ports and all the SFP+ switch ports. What could be th...
I have a Dell 720 Server with a I350-T4 card installed with the latest drivers and firmware running Server 2012 with the HyperV role. I am having trouble creating a Virtual switch in HyperV that will show SR-IOV...
I have 3 PC's, each of which is running Windows 7 x64, and each of which had no prior problems connecting to the internet or the network via their PCI-e Intel Gigabit CT Desktop Adapters. Over the course of the ...
I have a Dell PV500 server running Windows Storage Server 2003 x64 with an i340-T4 NIC that was just knocked off line by a Windows Update of the driver. I downloaded PRO2K3XP_x64.exe version 18.1 in an unsuccessful at...
Hi Guys, I am trying to enable PXE for an Intel 82599EB 10-Gigabit SFI/SFP+ Network card. I am running Linux CentOS 6.4 lspci | grep -i network 02:00.0 Ethernet controller: Intel Corporation I350 Giga...
Hi guys, I am having a problem with the igb driver on FreeBSD Issue: We have two Dell R720 servers with the Intel i350 QP adapter. We are need three connections. 1. Connection to external switch...
