I am trying to setup 2 x WD2002FAEX 2TB drives in RAID 0 to run Server 2008 R2 Enterprise and install the Hyper V role so I can run multiple OS for server labs testing. I have previosly had it setup but it was slow an...
Hi, my ss4200-e show amber light. I am able to run web interface but i get the message "data on your device is unavaliable.4 disks have existing data that will need to be overwritten to re-enable storage.Click here ...
ssWe have an Intel Modular Server, Model MFSYS25V2 and I will be replacing the SCM for this unit on Tuesday Morning and have a couple of questions: 1) Once our virtual Network servers are shut down, I wa...
I just bought a Gigabyte GA-Z87MX-D3H motherboard with Intel GBE Integrated LAN (I217-V) and I am ngbe i217 i217-vVot able to install the latest network connectivity driver on Windows Server 2008 R2 because it is not ...
For the second time now, something happens to Storage Matrix Manager and it can't read the BCD. How do I get RAID 1 re-enabled? I have a 2 month old full backup... Description: The system boots to Vista...
Hi! I would like to know what are the difference between E10G42BTDA and E10G42BFSR the first one has a cable type: SFP+ direct attached twin axial cabling up to 10 m and the second one: &nb...
Hi I have got 2 servers R1000GZ. One of them has too big noise from MB fans... First server: System BIOS - 01.02.0005 ME Firmware - 02.01.05.091 BMC Firmware - 01.00.2612 FRUSDR &nbs...
Either I'm so unlucky or it's common trouble for RS2BL040. Or a certain firmware. Can someone suggest? 2 Intel servers with the same configuration and software in a different contries from different supplyers ...
I had to replace the board and processor in my existing Windows SBS server. I combined an S1200BTLR board with a E3-1220 processor and 8Gb (2x4Gb 1333 ECC 240 UDIMM) memory. At boot up I get the following beep sounds ...
Hello, using Integrated BMC Web Console to connect S1200BTL BMC. Everytime I proceed Power Cycle Server choice under Console Redirection (Remote Control tab) I losing the BMC web connection. Browser says "Connected ...
Hello I'm trying to boot into Altiris WinPE2 via PXE on an IBM X Series x3550 M4 server which has an on board 4 port Intel i350 Gigabit NIC. I am unable to locate a suitable WinPE 2 driver for this. ...
Hi, I had a previously working system with a S5000PSL motherboard in it (No OS). I wanted to do firmware upgrades and tried downloading the latest and greatest from Intel - I was going to set it up as a test windows ...
Hello, few months ago I bought the Intel SRCSATAWB RAID controller which has been working fine so far (except one of the breakout cables which was damaged upon arrival). I have set up everything to my liking except on...
I bought one of these and added it to my home net work about 6 months ago. I'm using 4 1tb drives at raid 10. I completed and viewed 2 (business and personal) backups on the NAS from my DELL XP Desktop PC. I also have...
Hello everyone! I have had some issues with Intel RS2BL080 RAID card (which i have now connected to 6 x Hitachi 2TB drives), and after visiting Intel Support Area i've noticed a new firmware update that would ...
Support for this motherboard has ended. This board had been purchased 02/01/2007. However, with the release of Windows Server 2008 R2, it's like breathing new life into a server that still has adequate spe...
I have three S5000VCL boards and recently added a second E5450 to all three. Two of the three worked without a hitch but I cannot get the third board to boot up with the second processor installed. It is working fine ...
I have a few servers that are rebooting (ungracefully) unexpectedly. There is no errors in the logs. $ last shows me: reboot system boot 2.6.32-5-amd64 Sun Aug 12 20:53 ...
