There is S5000VSA board configured ad ESRT2 RAID. 3VDs - 2 raid 1 and 1 - raid 0. OS - W2008 R2, latest storage drivers and rwc2. first VD contains OS and act as Hyper-V Server, second VD contains vhd files of virtua...
Hi, I got two R10000GZ/GL servers couple days ago. I need them to try the PCIe Non-transparent-bridge (NTB) function. After installing Fedora 17 OS, there is no NTB function available. I think I should set some...
Have an SR2600URLXR server system and I am trying to find out the model number for the midplane. I can't find one written on it. The Web RAID console is listing it as ALMP2, but I can't find any drivers or firmware fo...
Hi, I got two R10000GZ/GL servers couple days ago. I need them to try the PCIe Non-transparent-bridge (NTB) function. After installing Fedora 17 OS, there is no NTB function available. I think I should set some...
hi, we have intel; R2000Gz server with two intel xeon phi 5110p cards (MICs) in it. If we boot the cards and make it online and keep idle, our servers gives kernel panic and returns to a # prompt wherein only ...
Good day! I have a server board Intel SE7520JR2 with the old version BIOS BMC (version 20). I can not update the firmware, because new updates are working starting with version 23. Please help me find the firmware BMC...
Hi, I have an older SuperMicro server with Xeon Quadcore, 5400 (seaburg) chipset and ESB2 controller and I would like to install Windows Server 2012. I don't find any specific server 2012 support/drivers, but ...
I have a new Intel R2312GZ4GCSAS server system with the optional RES2SV240 RAID expander card installed.This system comes with the RMS25CB080 hardware RAID module pre-installed. When installing Windows 2008 R2...
We're having a bit of an issue upgrading MFSYS25V2 to 10.16 (currently 10.9). The problems are with the upload of the new firmware to the chassis itself, rather than the later stages of the update process. Aft...
Up until recently the Download section for Intel Server Board S1200KP included 2 Bios Releases with Bios version 0023 to be the latest. But now 1st in the Download List for this specific board it is the following: BI...
I was trying to update via Linux using flashupdt command server's BIOS/BMC/ME and etc. For some reason I always get an error in return: Error BMC Firmware is already in Transfer Mode. Cannot start the update p...
Hi, everybody: I was getting intermittant failure messages using an RS2WC040 card. The Intel RAID Web2 administration software gave me a Controller 0 failed and was reset error, but the system booted OK, and everythin...
Hello I have a server with a RAID controller srcs28x. I need to configure the software RAID (not hardware). When loading click ctrl G. Delete all logical drives. The remaining 12 physical drives on two controllers. B...
Dear fellow Intel Users, I had a long, hard look on one of our machines running on the board named above. Since we do not implement IPMI/remote administration solutions my experience w. this features i...
Hey everyone, I have quite a few servers that I would like to setup Email Alerting on. They are all on the newest version of ASC (5.0). I know, currently, there isn't a way to test email alerting, as far as I ...
Hello, I have several S1200KP and S1200KPR boards working flawlessly with Linux. As I wanted more RAM, I built a machine around the S1200BTSR but have had a lot of irritating behavior surrounding UEFI (which I'v...
Intel's link to download the mmconfig file to configure the Remote Management Module (version 1) for S5000PAL boards is a dead link. Does anyone have this file that they can share? Thanks, Jason
I have an older server my company uses for testing. We're trying to install Server 2012 (not VMWARE) on it setup as RAID. It has the Intel Embedded Raid II in it, but I cannot get Windows to load. I've tried all drive...
I have a customer running adapter teaming using the ANS feature of the Intel ProSet drivers on their two servers. The motherboards on both servers are SE7520BD2 (with 1 Intel Pro/1000 MT Server and 1 Marvell Yuk...
Hey, My board has the nasty habbit of starting and restarting (only once). It started after after a bios update with server deployment toolkit (which does not autorun anymore by the way) I want to upg...
