can i use the following configuration to rdp zero client systems. please help me to provide best configuration server configuration: -server board s2400bb4 with two xeon e5-2400 , -6 LR-di...
Hi, Can somebody tell me how to upgrade the onboard SAS controller firmware of an S5000PSLSASR board? I have read the instructions: ================ Update Instructions ================ Warning: ...
Hi, I'm trying to get some custom cables fabricated to connect this motherboard to a server chassis, but I can not find any documentation on what type of connector is use. Does anybody know the Manufacturer an...
Ok so I finished building my server last night and every thing was looking good until I tryed to turn it on I plug a power cord in (being that its an American psu rated for international use but saying its needs 16gag...
Hello everyone, I actually planning to buy several S1200KPR boards to built some professional NAS, they need to have a low power consumption and i stop myself on two processors : Xeon E3 1265LV2 and Xeon E3 12...
Does the Intel S1200BT motherboard support SR-IOV? I couldn't really find any information online. The manual does state that VT-d is supported, but then again BIOS support for SR-IOV is required for it to work. Thanks.
Hi ... I have Qty 14 servers here with the S5520HCT serverboard .... and I would like to change the bootscreen to our company logo ... and I have looked near and far for some instructions how to do that without any lu...
Im trying to install windows server 2008r2 on this machine and i get to the install now and then it wants drivers ive looked through every driver on intels site i also tried server2003 and above does anyone know...
The motherboard S1200BTLR (Xeon E1220-v2) will work properly. Somehow once again I took it and turned it on. BIOS splash screen displays and indicators on the rear panel indicate the status 0xA3h (IDE Detect). Next, n...
Wonder if someone could shine some light on this issue. I have a Raid Controller RTW3B080 with fFast Path IO and a Expansion card RES2SV240 with 4 virtual driver 1- 4x SSD's in Raid 0 where the OS reside...
My server has been running for a few months, however today all of a sudden my "2nd hard drive" e:\ is not accessable and when I go into the raid utility the 3 drives for Raid 5 are saying Configured - Bad (Data Invali...
I recently purchased a used dell FS12 2u server on ebay. This is an off-lease unit from dell's DCS division which creates "custom" servers for large data center customers. Its using a vanilla s5000PALR motherb...
I have many intel servers in my Datacenter and I am trying to locate their serial/part numbers. Is there a software for this task? I tried using http://www.intel.com/support/siu.htm but you can only locate s/n of serv...
Hello Intel Community! This is my first time posting, so excuse me if it is in the wrong "section". I am attempting to run a few large gaming servers (the game is called "Minecraft"). I would be running...
Hi, We have purchase X-520-SR2, EB82599 based optical server network dual adapter card.(with IEEE1588 support). We have installed ixgbevf 2.6.2 driver released on March 15, 2012. In my PC after...
Hi there! I am interested in purchasing the Intel® Server System R2312GZ4GCSAS but I have problems identifying RAID options that come with it. :-( This is the link with the description of the sys...
Hi all. On this page - control panel LED definition: http://www.intel.com/support/motherboards/server/sr2612ur/sb/CS-030824.htm LEDs light B and E. From the description that has yet to be light and LED A, but it do...
