BIOS 0059 wireless keybord and wireless mouse (MS Natural Wireless Ergonomic Keyboard & Mouse 7000 ) The keyboard works fine, but mouse does not, but both are O.K. in 0058. I have tried plu...
I have the DH61AG motherboard with bios 0045. I would like to update to version 0104. The instructions at the download page are contradictory. See following cut and paste from the download pages. Case 1. If your sys...
Hi folks, Has anybody seen an issue with the DQ77KB mainboard suddenly refusing to power up? This feels like it's going to be a warranty claim type of thing, but I'm still hoping to find a fix that doe...
As the title states I found the root cause of all the misery and agony that DZ68BC users have been encountering with the 003X BIOS. The root cause is the Intel Management Engine Version. Initially the ...
Hi Experts, After struggling a lot I am able to install Windows 8 Pro on my Intel DZ77GA-70K Motherboard on a SSD, Now I have issues with the Wireless Module bundled with the Mother Board. The wireless driver ...
My system is a running RST - SDD on Port 0, Raid 1 - Ports 2 & 3 and the DVD's are on Ports 4 & 5. Latest Drivers - BIOS Version 060 and RST Version 12.5.0.1066 In windows explorer <My Computer - View - G...
I am sick of being dumped on by Intel every time I try to udate the BIOS on for the DZ77BH-55K motherboard. I decided to update my BIOS to improve the way Visual BIOS performed with a Wireless desktop. ...
I just built this computer and I installed Windows 7 with no issues. Originally, it had 048 BIOS and I wanted to upgrade to the latest. So I first did the 099 update then the 115 update. Now none of ...
rsThe enable acceleration option isn't listed at all. Why? Board is a DZ68VZ RST RAID driver version 12.6 RAID 1 volume is consistent with no errors and is in continuous update mode. I have looked fo...
Hi, Yet more grief from this board (over a month now, one thing after another) Finally got to a stage where I loaded Windows 7 64bit but can't get network connectivity. Installed the LAN driver from the...
I just picked up an Intel Refurbished DG31GL board off of Newegg to replace a dead MSI board. With everything installed on the board and when I power up the machine I do not get any video out and during post ...
hi every one i have a DG31PR motherboard that doesn't display anything and doesn't beep can any one help. I change ram and processor same thing i have tray it with video card but still black screen and no beep.
when I install windows 8 on my new DZ77GA-70K I get BSOD CLOCK_WATCHDOG_TIMEOUTS when I shutdown or restart. it happens when installing windows 8 to. I can install windows 7 with no issues at all. This is a replacemen...
Hi folks, Yesterday i have built my new computer. Specs are : intel dz77ga-70k, core i7 3770, 16gb ram, ssd corsair, ... I have a problem with windows 8. It already started when installing windows 8,...
Dear Experts and Enthusiasts, I've got a annoying problem that I've seen mentioned on teh NET but have not found a solution... I've have a D955XBK (current BIOS version 2049 - latest) since 2005 with a...
I have the latest BIOS (0099). I have two bootable hard drives connected. The BIOS always boots from the drive plugged into the lowest numbered SATA port, regardless of the boot order I specified in the ...
I updated the BIOS from version 039 to version 104. Windows XP SP3 was installed, it worked without problem, but after the update has stopped working. I tried to reinstall the operating system, but after a few secon...
Three months ago i purchased a new Intel DH61CR mobo and i3-3225 chip with HD 4000 from Newegg to replace my rock solid, spectacular Intel P4 2.4 that has been humming away at the end of my home's desk 24/7 for 10 yea...
This conversation is a continuation of HD4000 4es unrelated to GTA4 that may be continued here if your HD4000 crashes when idle: http://communities.intel.com/thread/36836 After their perfected solution b...
After successful BIOS update (from version 055 to 099), the boot process halts, the Hot CPU LED illuminates, the Memory LED flashes, and the speaker repeatedly beeps 3 times. POST Code 32 is displayed via the onboard ...
