Intel vPro Expert Center Blog

Finding AMT Objects in Active Directory

pcgeek86@gmail.com — Wed, 11 Nov 2009 21:03:38 GMT

If you are using Out Of Band (OOB) Management in Microsoft System Center Configuration Manager (SCCM) 2007 SP1 (or greater) to manage your Intel vPro clients, you may have noticed that computer objects are created in your Active Directory domain during provisioning of the Intel vPro firmware. These computer objects are created by the amtproxymgr component of an OOB Service Point, and allow Intel vPro to communicate directory with Active Directory, regardless of the operating system state.

Since these vPro computer objects appear very similar to standard computer objects that are created when joining a Windows OS to an AD domain, it may be hard to distinguish which ones are vPro accounts, and which ones aren't. This situation can be worsened if you somehow have Windows computer accounts mixed into the same OU that contains your AMT objects.

As you'll see below, it's very easy to locate these computers using some simple PowerShell code:

$vprosearcher = [adsisearcher]"(&(objectclass=computer)(serviceprincipalname=*:16993*)(samaccounttype=805306368))"
$vproaccounts = $vprosearcher.FindAll()

These two lines of code simply create a System.DirectoryServices.DirectorySearcher instance, with some LDAP search criteria to identify the accounts, and then assigns the results of this search to a PowerShell variable called $vproaccounts. The default search root is the top-level of your Active Directory domain, and the default search scope is already set to SubTree, so you don't have to specifically configure these settings on the DirectorySearcher. Once you're at this point, you can simply enumerate the accounts, or pipe the results into a PowerShell ForEach loop, and perform some operation against them (for example, givem them a Description attribute value).

Because this code sample uses the "adsisearcher" type accelerator (aka. type shortcut), it will only work with PowerShell v2.0 (included as part of the Windows Management Framework), unless you modify PowerShell v1.0 to include it. There's almost no reason not to be using PowerShell 2.0, now that it has been officially released, however.

I recommend using the free Quest PowerGUI tool to develop and debug PowerShell scripts.

Cheers,

Trevor Sullivan

Microsoft OOB Console Requirement

pcgeek86@gmail.com — Mon, 08 Jun 2009 17:24:06 GMT

Hello vPro Experts!

I would like to pass on some information that I discovered a while ago, based on a Microsoft Premiere Support ticket. I was having trouble getting the Microsoft Out-of-Band (OOB) Management Console functioning from a Windows XP system. I tried everything on a fresh, standard build of Windows XP, but nothing would work.

After working with Premiere Support, we finally discovered that Windows XP Service Pack 3 (SP3) was required for proper functioning of the Microsoft OOB console.

This behavior is actually related to some functionality that was added in SP3, specifically in the winhttp.dll library. There is a function called WinHttpSetOption in the WinHttp library, which is called with a parameter enabling the WinHttp Option Flag named WINHTTP_ENABLE_SPN_SERVER_PORT. This flag enables the WinHttp library to include the server port in the Kerberos Service Principle Name (SPN), since the AMT web service is running on a non-standard HTTP port (16993).

The Windows XP Service Pack 2 (SP2) version of the WinHttp library does not include this capability, and consequently fails to authenticate. In order to properly connect to ConfigMgr-provisioned AMT devices with the Microsoft OOB Console, please make sure your helpdesk / support systems are running Windows XP SP3.

If you have any questions, feel free to post them in the comments section, and I will do my best to answer them.

Trevor Sullivan

Systems Engineer

OfficeMax Corporation

Setting Power Policies in Windows Powershell

pcgeek86@gmail.com — Tue, 09 Dec 2008 02:03:20 GMT

Hello Intel vPro Community!

I'm going to talk to you today a little bit about how to use Windows Powershell to set Intel vPro power profiles. I'll provide a quick bit of background first on what power profiles are, and why you'd want to be able to set them with Powershell.

Intel vPro power profiles are nothing more than a setting in the Management Engine that tells the AMT chip when to be powered up, and when not to be powered up. In some cases, you may want vPro to be inactive during sleep states, or after the computer has lost power (eg. UPS failure).

In my case however, I want vPro to be always active. This is problematic, because Microsoft Configuration Manager's implementation of a provisioning server doesn't give you the option of setting the active power profile. Instead, during provisioning, ConfigMgr sets the active profile to whatever index "5" is. You'll actually see this in the amtopmgr.log file on your OOB (Out-Of-Band) service point during the provisioning process.

Because ConfigMgr decides the default power profile during provisioning, I've decided that I wanted to change it. Because Windows Powershell is an awesome automation tool, and because Intel's AMT Developer Toolkit (DTK) offers a .NET library that I can use in Powershell, I figured that I would figure out how to do it!

--------------------

You might remember my last post on how to use Powershell to connect to an AMT device. The process basically involves loading the aforementioned .NET DLL from the DTK, and then establishing a connection to the device. I didn't really get the opportunity to show you how to do a whole lot with it after making the connection though, so that's the purpose of this post! Let's go ahead and take a look at a few lines of Powershell code, so you can understand the retrieval, and setting of power profiles.

-------------------------------------------------

# In my last Powershell script, I used the $amtdevice variable

# to reference the AmtSystem .NET object. We'll assume at this point

# that you have already connected to the AMT device based

# on my last article.

$amtdevice

# By using the .NET Reflector tool, we can see that the AmtSystem

# object has a property called SecurityAdmin, which returns an AmtSecurityAdmin

# object.

$AmtSecAdmin = $AmtDevice.SecurityAdmin

# The AmtSecurityAdmin object has a method called GetPowerPackages().

# After examining this data type in .NET Reflector, we can filter for only the two

# properties we want to see, the profile ID, and its Name. We'll use the Powershell

# Select-Object cmdlet to filter this data.

$AmtSecAdmin.GetPowerPackages() | Select-Object -Property ID,Name

# You should get some output looking something like this:

# 12834f94-10fb-dc4f-968e-1e232b0c9065 Desktop: ON in S0
# ab0086a1-7f9a-424c-a6e6-bb243a295d9e Desktop: ON in S0, S3
# acab8672-b496-e248-9b9e-9b7df91c7fd4 Desktop: ON in S0, S3, S4-5
# 4dcd327b-be6b-8943-a62a-4d7bd8dbd026 Desktop: ON in S0, ME Wake in S3
# 46732273-dc23-2f43-a98a-13d37982d855 Desktop: ON in S0, ME Wake in S3, S4-5
# baa419c5-6f6e-4d8d-b227-517f7e4595db Desktop: ON in S0, S3, S4-5, OFF After Power Loss
# ede30bd6-c504-462c-b772-d18018ee2fc4 Desktop: ON in S0, ME Wake in S3, S4-5, Off After Power Loss

# Once we have a listing of the power profiles available on the AMT device

# we can get the one that we want, and then set it. Since I always want my

# AMT device active, no matter the system's power state, I'm going to choose

# "Desktop: ON in S0, S3, S4-5" which is index 2 (in a zero-based collection).

$TargetPowerProfile = ($AmtSecAdmin.GetPowerPackages())[2]

# Now that I have a variable referencing the target power profile, I will set the

# profile on the AMT device. The AmtSecurityAdmin object has a method called

# SetActivePowerPackage() that takes one parameter: the power profile we have

# a reference to.

$AmtResult = $AmtSecAdmin.SetActivePowerPackage($TargetPowerProfile)

"Setting power profile to $($TargetPowerProfile.Name) resulted in $AmtResult!"

##### End Setting Power Profile #####

# Let's also take a quick look at how to get some basic information about

# the AMT device's provisioning data. We can figure out if IDE-R, SoL, and the

# WebUI are enabled. We'll use the AmtGeneralInfo object for this.

# Get a reference to the AmtGeneralInfo object

$AmtInfo = $amtdevice.Info

# Write out the current configuration settings

"SOL Enabled: $AmtInfo.SerialOverLanEnabled"

"IDE-R Enabled: $AmtInfo.IdeRedirectEnabled"

"WebUI Enabled: $AmtInfo.WebUiEnabled"

-------------------------------------------------

I hope this helps get you on your way to doing some cool Powershell / vPro automation! Let me know whether or not this helps you in your endeavors

Trevor Sullivan

Systems Engineer

OfficeMax Corporation

Superhero powers with Intel® vPro™ Technology?

justin.van.buren@intel.com — Sat, 21 Jun 2008 18:25:53 GMT

Given the new exciting capabilities in Intel vPro technology around hardware assisted manageability and security, our IT customers have mentioned that this new technology makes them feel much more powerful - like a superhero! See the video below to see what superhero Intel vPro technology made them feel like.

]]>

]]>

To see more videos from MMS 2008, go to http://www.intel.com/go/mms/

IT administrators compete at MMS 2008 in the Intel vPro technology Challenge

justin.van.buren@intel.com — Wed, 28 May 2008 22:54:21 GMT

We had the Intel vPro technology Challenge at MMS 2008 - a competition where teams of two competed to fix a troubled PC using Microsoft System Center Configuration Manager 2007 with PCs with Intel vPro technology. Check out how much fun this Challenge was at MMS 2008 this year:

]]>

To see more videos from MMS 2008, go to: http://www.intel.com/go/mms/

What Acronym best describes Intel® vPro Technology? (MMS 08)

justin.van.buren@intel.com — Tue, 20 May 2008 00:10:44 GMT

Sometimes within Intel Marketing, we're told that our description of Intel Centrino with vPro technology or Intel Core 2 with vPro technology is a bit lengthy. Therefore, while at MMS 08, we asked Intel customers as well as technical experts from Intel and Microsoft to give us their best, most concise acronym that best describes Intel vPro Technology. Listen to their responses below.

]]>

To see more videos from MMS 08, go to http://www.intel.com/go/mms/

What does the "v" in Intel vPro technology mean to you?

justin.van.buren@intel.com — Mon, 19 May 2008 22:28:37 GMT

When Intel released Intel vPro technology into the marketplace in 2006, the press asked us what the "v" in Intel vPro technology meant. Now that the technology has been in the marketplace for almost two years, we thought that the best answer to the question, "What does the "v" in Intel vPro technology mean to you?" would come from Intel customers, as well as from some of the technical experts from Intel and our partners who deal with our customers on an almost daily basis. See their answers below.

]]>

To see more videos from MMS 2008, go here: http://www.intel.com/go/mms/

Meet the Intel vPro technology Bloggers - Terry Cutler from Intel and Joel Smith from Symantec

justin.van.buren@intel.com — Mon, 21 Apr 2008 19:54:47 GMT

Intel and Symantec value having interactions with the IT community on a year-round basis. Listen to two of the most prominent and prolific bloggers on Intel vPro technology - Terry Cutler from Intel and Joel Smith from Symantec talk about how they communicate with the community via the Altiris Juice or the vPro expert center community websites.

]]>