Home > Intel Communities > Open Port IT Community > The Server Room > Blog > Tags > workstation
1 2 Previous Next

The Server Room Blog

30 Posts tagged with the workstation tag
1

Why upgrade your hardware when migrating to SAP ERP 6.0?  Because it makes simple, practical, business sense that is all.  SAP has identified several key reasons why customers are concerned about migration and several among them are as follows:

·         Cost, Cost, Cost

o   HW infrastructure cost is highlighted as one of the key barriers of migration

·         Business Justification

o   Is there a compelling business reason to upgrade the hardware?

·         Additional risk of business disruption

o   Migration of ERP environment is complex enough…how much more risk is there when upgrading your hardware?

From a cost perspective, the perception that hardware is a barrier to migration can be easily overcome.  Based on research, the hardware cost as a percentage of the overall migration cost is only about 7%.  That means 93% of the cost is in licensing, consulting, etc, etc.  HW costs are only the “tip of the iceberg” and the real $ investment lies elsewhere in the equation.

Is there a compelling business reason to upgrade your hardware? Well…frankly, it does not make sense not to do it.   One, we showed above that the hardware investment is minimal compared to SW licensing, consulting, service, etc.  Two, the hardware requirements of ERP 6.0 are significantly higher than previous versions. ERP 6.0 requires up to 2.5x more CPU performance, 2.5x more memory and 1.5x more I/O!  You will need the increased performance and scalability that Intel provides in our microprocessors.  While the ERP performance requirements have increased 2.5x, Intel performance with SAP has increased 10X!  Oh, btw…energy efficiency does matter and in your new ERP environment you will be able to consolidate servers and save on power and cooling costs.  TCO will be significantly reduced and from hardware investment standpoint, you are likely going to recover the cost of the servers in a very reasonable timeframe.

From my discussions with the IT community, their major concern and number one focus area is to prevent business disruption and downtime.  This costs companies real and significant money.  The fact is that an ERP migration is a complex enough project managing the strategic, functional and technical portions.  Adding a server infrastructure change increases fundamental risk.  But, the key here is that it is done often and done successfully.  Intel IT has published several whitepapers on the subject and communicated “Best Known Methods” to minimize that risk.    A quick summary is inserted here:

Challenge:

         Convert Intel’s Worldwide Warehouse Management Software

         Upgrade from SAP* ERP version 4.7 to 6.0, change the DBMS, and perform a Unicode* conversion as well as a hardware upgrade

         Minimize downtime

Benefit to Intel IT:

         SAP ERP 6.0 improves Intel supportability

         Increases ease of integration to SAP NetWeaver* 7.1 Suite

         Provides access to Enhancement Packs and Enterprise Services

         Intel® Itanium®-based servers provide access to 128 GB of memory for database and SAP operations and significantly increased performance from true 64-bit processing

Key Results:

         Reduced downtime of upgrade by 50% by using Intel Architecture

In summary,  upgrading your server infrastructure when migrating your ERP environment is a very, very complex task, but form a business perspective, it should be fairly easy to see the true benefits from combining the ERP migration and hardware upgrade at the same time.

1 Comments Permalink
1

The digital workbench is like the workbench at home where you have pliers, nails and hammers that we use to build or fix things—the workbench holds all the best, most useful tools to complete a project and makes them available at your fingertips.

The digital workbench replaces analog tools with digital tools and software suites from ISVs (e.g. Altair, ANSYS, Autodesk, Dassault CATIA, Dassault SIMULIA, ESI, MSC, PTC, Siemens PLM and others).  These ISV’s are all laser focused on enabling designers to move analysis further up the design chain.  Couple this with recent performance gains available on workstations based on the Intel® Xeon® processor 5500 series from suppliers like Boxx, Dell, HP and Lenovo and you have the opportunity to now view your workstations as a digital workbench.  The result is a new environment that enables users to rapidly test and refine their ideas potentially at the speed of thought. 

The digital workbench, powered by two intelligent Intel® Xeon® 5500 processors based on the Nehalem microarchitecture, can help you transform complex and visually intensive data into actionable information at near-supercomputer speeds. 

 

 

1 Comments Permalink
0

“Imagination is everything. It is the preview of life's coming attractions.” Albert Einstein

Today’s workstation can provide you with a magnificent digital canvas to create tomorrow today.

With workstations powered by two Intel® Xeon® 5500 series processors, engineers have the opportunity to create, shape, test and modify products before they become real. Engineers can now design, visualize and simulate products from the conceptual design phase through the entire manufacturing process. This is done virtually before any investments are made in a prototype.

“Experiment fearlessly.” “Innovation is bloody random.” Tom Peters

Peters, a world renowned author and management consultant, recognized that innovation is more art than science.

Consider this example: Taking innovation to an entirely new level, Boeing, in the late 1990s, employed a process known as algorithmic design to see what designs might be viable to meet a specified hypersonic aircraft design criteria. The algorithmic design process enabled computers to create and test new ideas against the specified design criteria without human intervention. As a result, more models were evaluated in less time, and a vehicle that was counterintuitive to what many engineers may have thought possible was evaluated. Innovation just accelerated.

Intel technology has seen dramatic changes since Boeing first tested the idea of algorithmic design in the last decade. Workstation performance has gone up Dual-processor workstations have yielded to workstations with two processors, eight cores and 16 computational threads. Science or simulation that was never tractable on a workstation before is now standard, and it is getting faster.

“I confess that in 1901 I said to my brother Orville that man would not fly for fifty years.” Wilbur Wright

You think all you need is an entry-level workstation with a single Intel® Xeon® processor.                       After all , you only do CAD—right?

However, as you begin to adopt modern workflows and realize the dramatic impact that simulation-based engineering or digital prototyping can have on your product development cost and schedules, you realize that the cost of the second processor and additional memory necessary to support digital prototyping was far less expensive than the cost of multiple physical prototypes and the associated time to produce them. Instead of investigating hundreds of digital prototypes, you only have time to look at a single physical prototype and ask: What if I …?

Those “what ifs” could have been played out on a dual-processor Intel Xeon processor 5500 series-based digital workbench faster, and your time and cost of physical prototypes could have been significantly reduced.

 

 

The digital workbench, powered by two Intel® Xeon® 5500 series processors, can have an enormous impact on your organization’s ability to design, visualize and simulate products, from the conceptual design phase through the entire manufacturing process, and it is all done virtually before a prototype is ever invested in. These digital workbenches exceed the computational power of the Cray C90 series, which in the 1990s was revered as the fastest ever.

Without question we all recognize that simulation and modeling have become indispensable tools in design. But visualization remains the principal conduit to transforming data into knowledge and actionable information. The digital workbench can provide you with both the compute capacity and the visualization capability you need to innovate faster.

If all you are doing is CAD on your workstation, then an entry workstation may be best your solution. However, as others around you adopt modern workflows that incorporate simulation-based engineering and digital prototyping, you may want to step up to a more comprehensive digital workbench solution that provides an entire suite of tools to help you play more “what ifs” locally and faster than ever before.

One more point on this: If you are stuck on the entry workstation, then you may want to consider a mobile workstation. While the immediate cost will be higher than an entry-level workstation, the real cost may be lower. With mobile workstations you can design with your customers and not just for your customers. You may be able to reduce the number of design reviews by innovating with your customer right there as spontaneous ideas happen. The real cost of a tethered entry-level workstation may be indeed be much higher than you think.

Join the revolution and innovate faster with the digital workbench powered by two Intel(r) Xeon(r) 5500 processors

0 Comments Permalink
0

Congratulations to Ron as the winner of the Intel Xeon Workstation Sweepstakes.  He has been a member of The Server Room for over a year and was able to complete the quiz on the first attempt. 

Good job!

RonEspiritu.jpg

 

"I was excited to hear that I won the Intel Xeon workstation sweepstakes.  With its incredible performance, the system offers me the flexibility to use it in so many ways that I'm not sure how to best utilize it at the moment. It's a welcome problem to have and I look forward exploring the possibilities. Thanks to Intel and the Server Room team for providing a great resource to everyone!"

 

Thank you all for entering and look for more sweepstakes offerings in the near future.

- Your 'The Server Room' Admin's

0 Comments Permalink
0

Are your “stuck at the desktop?”   A May 2008 study from the Council on Competitiveness and IDC identifies the barriers large and small firms face in moving from desktop computers to High Performance Computing (HPC) servers.  

Among the study findings1, most firms:

-          Reveal that they have important problems they cannot solve on their desktop systems

-          Face three major barriers to adoption:  lack of application software, lack of sufficient talent, and cost constraints

As a scientist, an engineer, or an analyst: Have you outgrown your desktop?  What kind of new innovation or capabilities would the use of a HPC cluster give you?  Imagine the capability to analyze data and gain more insight faster, or the ability to virtually prototype your ideas product more efficiently and cost effectively, or perhaps analyze, model, or simulate larger problems.

Few OEM products aimed at the personal or “desk-side” segment are making easier for end users to adopt HPC and help to overcome some of the barriers to adoption:  the Cray* CX1*, SGI* Octane* III, and HP’s  CP Workgroup System.  These products are aimed at addressing the needs of the entry level HPC market and the workstation users that have outgrown their desktops.  Both the Cray CX1 and SGI Octane III systems are Intel® Cluster Ready (ICR) program certified which means that Intel has worked with the hardware, system, and application vendors to ensure your configuration has been pre-tested for interoperability, so you can deploy with confidence.  ICR helps to reduce TCO by making sure the components keep working together over the cluster’s lifetime, to increase availability and save time for IT departments.

So if your IT department cannot buy you full blown super computer, ask them for a personal super computer.

 

 

1 Source: Reveal.  Council on Competitiveness and USC-ISI Broad Study of Desktop Technical Computing End Users and HPC, May 2008 (http://www.compete.org/publications/detail/420/reveal/)

*Other names and brands may be claimed as the property of others

0 Comments Permalink
0

“Imagination is everything. It is the preview of life's coming attractions.” Albert Einstein

Today’s workstation can provide you with a magnificent digital canvas to create tomorrow ...... today!

With workstations powered by two Intel® Xeon® 5500 series processors, engineers have the opportunity to create, shape, test and modify products before they become real. Engineers can now design, visualize and simulate products from the conceptual design phase through the entire manufacturing process. This is done virtually before any investments are made in a prototype.

“Any color—so long as it's black.” Henry Ford

Like the automobile, the workstation has morphed into something much more than what it once was. It now has more capabilities and features than its predecessor and, if you allow it to, it can help you accelerate the pace of your innovation.

Today’s workstation gives engineers a new tool that can be likened to a digital workbench. This tool is powered by two Intel Xeon 5500 series processors with Intel® Turbo Boost Technology and Intel® Hyper Threading Technology to take advantage of the processor’s power and thermal headroom to enable increased performance of both multi-threaded and single-threaded workloads. 

Today's workstation can host a suite of software applications from ISV's like Autodesk, SolidWorks, PTC, Bentley and others to create and test their ideas. The pliers, hammer and nails found on a workbench in a garage or basement have now been replaced with digital tools that promise to accelerate innovations via a process known as digital prototyping. Its enablers include application tools like detailed CAD, CAE and PIM. Together they represent the new digital workbench—a powerful innovation tool you can use to bring your ideas forward faster than ever before.

“I confess that in 1901 I said to my brother Orville that man would not fly for fifty years.” Wilbur Wright

You think all you need is an entry-level workstation with a single Intel® Xeon® processor. After all, you only do CAD—right?  You may be thinking like Wilbur Wright.

Innovation in the workplace is paced by how well you can use technology to test and improve your ideas. As you begin to adopt modern workflows you may realize the dramatic impact that simulation-based engineering or digital prototyping can have on your product development cost and schedules.  You will soon realize that the cost of the second processor and additional memory necessary to support digital prototyping was far less expensive than the cost of multiple physical prototypes and the associated time to produce them. Instead of investigating hundreds of digital prototypes, you only have time to look at a single physical prototype and ask: What if I …?

Those “what ifs” could have been played out on a dual-processor Intel Xeon processor 5500 series-based digital workbench faster, and your time and cost of physical prototypes could have been significantly reduced.

Are you ready to adopt modern workflows and accelerate your innovation?

 

 

 

0 Comments Permalink
0

A virtual workstation uses both virtualization hardware and software technologies that, when combined, provides end users with an uncompromised workstation experience.  It gives engineers and IT user’s concurrent access to key workstation hardware functions previously not available with traditional virtualization technologies. Through this approach, you get near native access to key workstation services, such as those delivered by graphics cards or NICS, needed to run multiple high-performance applications regardless of the operating system they run on. . Best of all, with Intel® Virtualization technology for directed I/O, delivered by Parallels Workstation Extreme, you will be able to leverage this new virtual workstation capability in ways that improve workflows across operating systems while reducing IT management requirements.  This is a win/win for both you and IT.

Ok we have segregated compute resources between IT and the user. 

What can you get with Intel’s VT/d technology? 

How many times have you been faced with a need to run an application that runs on a prehistoric OS, or that runs 32 bit OS when your entire environment is running on 64 bit? Or maybe you need run two different graphics-intensive workloads in a LINUX and Microsoft Windows® environment.  With Intel VT-d and Parallels™ Workstation Extreme software you may be able to do just that at near-native speeds.

What else can you do with a virtualized workstation?

Have you ever been in a situation where one application requires version X and another application you use daily requires version Y of the same OS.  With Intel VT/d and Parallels™ Extreme® software you may be able run both at near native performance at the same time.  No rebooting, no dual booting or emulation required.  Just fast, seamless answers to complex problems – across multiple segments like Oil & Gas, DCC, Manufacturing, and Research.

Ever hear of a digital workbench?

It is a tool that designers and engineers use to perform what many call digital prototyping or simulation based engineering.  It is usually a set of tools that combine needs for LINUX and Microsoft Window® based applications to create and test their ideas.  Think of a virtual wind tunnel where simulations are performed in a LINUX environment and the design and visualization is performed in a friendly Microsoft Windows® environment.  With Intel VT-d and Parallels Workstation Extreme you can do both at near native speed.  That means interactive product development and engineering, and that leads to potentially better deigns in less time.

Do you need a virtualized workstation?

If you have a need to run applications in different OSes, diverse OS levels or types, or you need to visualize in different OSes, then answer is probably yes.

To learn more about Intel Virtualization Technology please visit www.intel.com/go/workstation.

To see an online demo of Parallels™ Workstation Extreme software please visit http://www.parallels.com/products/extreme

0 Comments Permalink
0

If you have been around the workstation community for a while you may be used to seeing numbers like 4, 8 12 64GB.  Those are the old numbers – sorry.

When the Intel® Xeon® processor 5500 series debuted it introduced systems with up to3 memory channels as opposed to just two.  So how much memory do you need now?  Well to get peak performance from your workstation you need to think in multiples of 3 and not 2.  That means not 4GB and certainly not 3 GB.  Numbers that work best are identified in the table below.

Number of Dimm’s

3

6

9

12

18

Size

Of

Dimm’s

2GB

6

12

18

24

36

4GB

12

24

36

48

72

8GB

24

48

72

96

144

Ok that is a lot of choices.  Which one is most likely to deliver the best workstation experience when you have three memory channels and why?

As before in the two channel days, the best experience will be arrived at when you evenly populate dimm slots.   That answer will vary on whether or not you have a single processor workstation or a dual processor digital workbench.

If you have a single processor entry level workstation you will want to configure your systems with 6, 12 or 18GB if you are using 2GB memory sticks.  If you are using 4GB sticks you want to think of 12, 24 and 36GB.  And if you are really thinking rich memory configurations you will want to focus on 24, 48 and 72GB configurations.  This assumes you have up to nine dim slots.

If you are using dual processor digital workbench and you are mega-tasking through a number of complex task you may want to consider the following sweet spots. 

With 2GB memory sticks you will need to think of 12, 24, 36Gb.  With 4GB memory sticks you should think of 24, 48 and 72GB and with 8GB memory sticks you should be thinking of 48, 96 and 144GB.  Again the goal is to keep the memory channels with the same memory sizes and speeds to see the best performance.  When you do that you are most likely going to see the best performance.

If you are wondering which kind of workstation is best for the work you do, you want to visit the Intel workstation technology page and use the workstation selection tool.  It can be found at www.intel.com/products/workstation/processors

0 Comments Permalink
0

Hi All,

 

You found the Intel XEON Workstation Sweepstakes!

 

 

Click HERE to start the quiz and submit your entry today !

 

http://communities.intel.com/servlet/JiveServlet/download/2821-32-2552/URL%20card%20front_small.png

 

Good Luck to all.

0 Comments Permalink
0

I wrote a while back about how the Xeon 7400(Dunnington) processor series compared to RISC. Since then I have shared information through other blog posts and sharing content about how Xeon 7400 and Xeon 5500 will compare to both SPARC and POWER.

 

Xeon 7400 and Xeon 5500 are the current products shipping into the marketplace today. I.M.H.O they offer a pretty compelling alternative from both a performance and TCO perspective Vs SPARC and POWER. But I will not try and repeat all the reasons here

 

What I wanted to share with you was some thoughts about what the next product to succeed Xeon 7400 will bring to the RISC party. Nehalem-EX is the code-name for our next generation of product designed to serve workloads currently serviced by Xeon 7400 today (i.e. Database, ERP,  BI etc). EX btw is what we all would traditionally call MP or multi processor servers

 

Don't stop reading now, here is why I'm EXCITED about what Nehalem-EX will bring to the RISC party.

My excitement is actually based on real customer discussions about what Nehalem-EX will do for them and why it delivers some new stuff (my code for features and benefits) which they see as a pre-requisite to make the move from RISC to Xeon. For some customers the TCO and performance of  products have been enough to convince them to move. For some other customers there are still some checkboxes remaining which I believe Nehalem-EX will address

Here is a snapshot of some of the cool new stuff which is actually convincing customers (from some real deals that I have worked)

    1. Improved bandwidth. Up to 9 times memory bandwidth of previous generations
    2. Introduction of Quickpath Interconnects to the EX systems
    3. Add new RAS features previously seen on Itanium products to Xeon products
    4. Significant improvement in performance vs previous generations e.g. Database 2.5xe
    5. More scalable platforms through 8 OEMs offering >8S. These platforms are key to manage large databases and for large scale consolidation
    6. Mainframe class availability in scalable platforms

 

For more information check out the press briefing from May. See more the details in the presentation

 

 

 

Nehalem-EX goes into production later this year and I am pretty excited about how it will change the game. What do you think?

0 Comments Permalink
0

Your most valuable employee is the one that creates tomorrow’s successes.  Providing them tools that help them do that faster will help your organization create new products or optimize old ones more rapidly.  The benefit to the organization is increased opportunities to win the customer’s attention via new products or your responsiveness to their request; the employee gets to brag on what he or she just helped bring to market.

Before we get too far let’s look at Intel’s mission with respect to workstations.  We are laser focused on supplying technology that provides users with an uncompromised experience in transforming their ideas into reality.  With that in mind we look at how users create; we try understanding their obstacles and work with the ecosystem of hardware and software providers to deliver solutions to real problems that may be inhibiting their opportunity to innovate.  

One technology that is helping users innovate faster is virtualization. 

No, we are not looking to remove the workstation from the user’s desk or share his or her workstation with peers, who also need a workstation.  We are using virtualization to deliver the performance they need to innovate faster.

The Observation

We saw workstation user’s innovation slow as they multitasked between tasks – some of them not even theirs.  The involuntary tasks included deploying IT security patches, updates, and system backups to name a few.  We also saw that users were no longer just doing Computer Aided Design (CAD) alone, but they were doing CAD, using productivity tools, meshing, web surfing for supporting facts, collaborating via video and Instant Messaging (IM) tools, digital white boarding and trying to do analysis-driven design.  They were very busy people who can’t afford any downtime or slow time.

In some cases we noticed that some users actually had not one, but two or more workstations running in completely different environments, many times with different OSs.

The Problem

What the above really lead to is a conclusion that too many tasks were going after too few resources and that the experience we had hoped the user would encounter was not happening.  In fact the reverse was happening – interactive creative tasks were slowing, system sluggishness was at an all time high.  The “uncompromised experience in transforming their ideas into reality” we wanted for a workstation user was not there and any innovation that was possible was slowed down to a crawl.

A Potential Solution

Intel® Virtualization Technology for Directed I/O (Intel VT-d), once just thought of for servers actually has a place in the workstation market. 

This technology provides an important step toward enabling a significant set of emerging usage models in the workstation. VT-d support on Intel platforms provides the capability to ensure improved isolation of I/O resources for greater reliability, security, and availability.  That is a mouth full let’s see it in action.

There are two key requirements that are common across workstation usage models.

1.       The first requirement is protected access to I/O resources from a given virtual machine (VM), such that it cannot interfere with the operation of another VM on the same platform. This isolation between VMs is essential for achieving availability, reliability, and trust. This helps you get the performance you want from your workstation.

2.       The second major requirement is the ability to share I/O resources among multiple VMs. In many cases, it is not practical or cost-effective to replicate I/O resources (such as storage or network controllers) for each VM on a given platform.

In the case of the workstation, virtualization can be used to create a self-contained operating environment, or "virtual software appliance[RC1] ," that is dedicated to capabilities such as manageability or security. These capabilities generally need protected and secure access to a network device to communicate with down-the-wire management agents and to monitor network traffic for security threats. For example, a security agent within a VM requires protected access to the actual network controller hardware. This agent can then intelligently examine network traffic for malicious payloads or suspected intrusion attempts before the network packets are passed to the guest OS, where user applications might be affected. Workstations can also use this technique for management, security, content protection, and a wide variety of other dedicated services. The type of service deployed may dictate that various types of I/O resources, graphics, network, and storage devices, be isolated from the OS where the user's applications are running.

The Result

In collaborating with virtualization and automation leader, Parallels, on its Parallels Workstation Extreme solution,  we identified two impediments to workstation user productivity.  The first was the issue around general resource overhead that afflict a traditional virtualized workstation system due to  insufficient resources to address the overload of requests. The second issue explored includes the more complex problem of a single workstation with the need to support multiple OSs and display visualization programs at near- or full-performance within virtualized machines.

The first issue was more straightforward - create VMs, partition resources and now the user has a very resilient workstation that is capable of delivering the intended experience.  IT can have their VMs and the user has his or her workstation back and the concept of digital prototyping to create and explore a complete product before it is built is a reality.  The creative innovator in the company can now iterate through more ideas in less time and your company created more opportunities to catch the customer’s attention just went through the roof.

The second issue offered a more complex challenge.  We identified certain industries such as the oil and gas exploration space where users actually had two or more physical workstations - one running Windows, the other running Linux. Both workstations had visual display requirements by the end user and both computers acted on the same reservoir data with applications that while similar in many ways, were still different in their functionalities and purpose.  In oil drilling projects that typically involve millions of dollars in capital investment, the confirmation of expected end results is an asset that far outweigh the costs of a few workstations. Nevertheless, in today’s economic setting, the ability to get the same functionalities at a lower cost is one of many key drivers in helping companies achieve healthy bottom lines.

The Proof Point For Virtualization In A Workstation Engineers from Schlumberger, a leading oil field service provider, run performance-demanding applications such as GeoFrame* and Petrel*.  These applications serve to analyze complex geological and geophysical data and determine the viability of potential reservoirs, or to optimize production at existing sites. With GeoFrame running on Linux* and Petrel on Microsoft Windows*, Schlumberger engineers have been using these applications on two separate physical workstations, driving IT spending higher, pushing down user productivity and increasing both power consumption and IT maintenance costs.

A New Paradigm For A New Day

With the availability of Intel Xeon processor 5500 series-based workstations, game-changing workstation virtualization software such as Parallels Workstation Extreme has opened up new horizons with breakthrough graphics performance with Intel’s latest processor technology. Parallels Workstation Extreme is built on top of the Parallels FastLane Architecture that effectively leverages the full potential of hardware resources such as graphics and networking cards to offer optimal workstation performance.

In comparison testing, Schlumberger compared the concurrent performance of applications running side-by-side on a virtualized Intel Xeon processor 5400 series-based workstation with the same setup on the newer Intel Xeon processor 5500-based machine. The results were astounding. The first machine with the older processor without Intel-VT-d support ran Petrel on the host OS at full native speed, but performance for GeoFrame in a VM slowed enormously. While Petrel refreshed its graphics at a rate of 30 frames per second, GeoFrame crawled along at a graphics refresh rate of JUST one frame every 19 seconds, an agonizingly slow performance on an older workstation without Intel VT-d support.

When the group tested the same applications on the newer Xeon 5500 series workstation with Intel VT-d support, the results were striking: Both applications – Petrel running on the host OS and GeoFrame in a guest OS in a VM - ran at full native speed, and both were able to refresh graphics at near 30 frames per second—a 570 times improvement over the first workstation.

Russ Sagert, Schlumberger’s Geoscience Technical Advisor for North America said “our engineers were blown away by the performance. We hammered these machines with extreme workloads that stressed every aspect of the system. Amazingly, the new workstation based on the Intel Xeon processor 5500 series provided performance enabling this multiple OS, multiple application environment for the first time.”

The key element in Schlumberger’s new environment is Intel Xeon processor 5500 series-based workstations with Intel® Virtualization Technology (Intel® VT) for Directed I/O (Intel® VT-d).  Together, these technologies enable direct assignment of graphics and network cards to virtual machines, enabling the machine to circumvent the interrupt and exit loop and clearing the previous performance problems.

Running in conjunction with Parallels Workstation Extreme, which effectively leverages Intel Virtualization Technology, including VT-d, the solution revolutionizes virtualization for high-end users. “High-performance virtualization on Intel Xeon processor 5500 series-based workstations is a game-changing capability,” says Sagert. “We can allocate multiple cores, up to 64 GB of memory and a dedicated graphics card to each machine. The results are spectacular.”

In the final analysis, moving to the Intel Xeon Processor 5500 series of next-generation workstations does far more than cut costs. It impacts the way that work gets done. If you have clients running the kind of resource-intensive, graphics-rich applications that traditionally slow to a crawl in a virtualized environment, consider the benefits of finally moving beyond the I/O barrier.

A fully configured Intel Xeon Processor 5500 series-based workstation running Parallels Workstation Extreme delivers the performance level that makes a virtualized workstation a leading contender for users with multi-workstation requirements. A streamlined work interface, reduced office noise and clutter, access to the same data repository and significant performance gains works on the user side. But the IT organization also gains benefits by lowering capital, management, support, provisioning, data protection, space, and energy and cooling costs.

Moreover, the IT team can now standardize on a single OS image while addressing alternative requirements.

Learn More

Intel Workstation Processors http://www.intel.com/products/workstation/processors/index.htm

Parallels Workstation Extreme

http://www.parallels.com/products/extreme


#

[RC1]To distinguish from the hardware appliance breed

0 Comments Permalink
0

Running multiple Unix environments across a range of locations adds increased complexity and cost to the IT environment. I came across an interesting case study and wanted to highlight some of the key findings

 

YPF SAis the largest company in Argentina operating in the Oil and Gas industry. The company has 29 gas plants around Argentina running different Unix environments such as HP-UX, AIX and Solaris.

 

YPF SA consolidated their SAP ERP and Oracle DB environment from multiple Unix environments to Red Hat Enterprise Linux 5 with integrated virtualization running on Intel Xeon based platforms from IBM System X

 

Some of the key findings to highlight

  • Key requirement from Unix Administration Team that "migrating from old RISC/Unix and proprietary servers to open and flexible platforms would pose no risk to the reliability, availability and performance of the systems"
  • Positive impact on cost and performance; Lowered costs, simplified management and increased compatibility
  • Reduction in costs especially when compared to license costs of RISC based platforms
  • Increased performance and availability drove decision to scale with RHEL and Xeon
  • Ability to leverage Redhat integrated virtualization. Free up internal hardware and technical resources for other projects

 

 

I guess the combination of Redhat and Intel deliver the business results that customers are seeking. What do you think?

0 Comments Permalink
1

Are you a developer writing applications to run on the Solaris operating system?. Are you looking for ways to optimize your Solaris solution on industry standard architecture based on Intel microprocessor? If you answer yes to either of these questions then please read on.

 

Intel and SUN have been working closely together to optimize the Solaris operating system on the Intel Xeon 5500 processor. Most of you probably know the Xeon 5500 better by its product codename Nehalem. The Xeon 5500 is the the product that fits into 2 socket platforms.

 

SUN have just published a very compelling quick reference guidethat will assist both Developers and System Administrators looking to optimize Solaris solutions on Xeon based processors. The guide talks about the work that Intel and SUN are doing together, technical descriptions of specific features and capabilities that can be implemented in the Solaris OS to optimize the capabilities of the Xeon.

 

I have just finished reading this and it is a very compelling paper covering topics such as

- How Solaris takes advantage of Intel Turbo Boost Technology to use available power headroom to deliver higher performance based on workload demand

- How Solaris can take advantage of new Intel Quickpath Interconnect (better known as QPI) and other innovations in the OS to reduce memory latency

- How Solaris performance counters help to better manage workloads

- How Solaris takes advantage of many of the power efficiency capabilities in the processor. Things like Power Aware Dispatched in Solaris enable the processor to stay longer in idle states. In non tech talk this saves power.

 

Solaris has been a tried and tested operating system for along time for companies running their most business critical workloads. This paper talks about the combination of Solaris and Xeon to deliver improved reliability and availability for these critical workloads. Detail information on predictive self healing, fault management, leveraging Intel Machine Check Architecture and more all included in this paper.

 

Probably my favourite section is around the developer tools optimizations and the different tools available for developers that want to run and optimize their applications on Solaris and Xeon.

 

Ok, I'll stop waxing lyrical now. This is a very compelling paper and it does certainly construe that Solaris and Xeon 5500 could be the perfect combination for your Solaris solution. What do you think?

1 Comments Permalink
2

Looks like the Intel® Xeon® processor 5500 series is making lots of noise in HPC.  The QPI and integrated memory controller are really providing the boost necessary to make it an all around performance leader for HPC applications.  With all this performance why did Intel add a third memory channel?

The third memory channel enables the platform to support a boat load of memory.  Matter-of-fact, up to 192GB can be supported in a two socket configuration.  It wasn’t too long ago when only 32GB was supported in a dual socket configuration.  By having the ability to support so much memory you can now meet the needs of almost every HPC application.  The 5500 series is intended for all server markets, but let’s face it, with the design changes Intel made with the new architecture the server segment gaining the most benefit appears to be HPC. 

It seemed like yesterday when the only way to have access to large memory configurations was through expensive, proprietary SMP systems.  The HPC market for large SMP systems is still out there but it is shrinking…fast.  Today, we are clustering low cost solutions to create some of the most powerful systems in the world.  Standard components are leading to lower and lower system costs, delivering a price/performance advantage alternative solutions cannot meet.

Now that a single dual socket node can support up to 192GB’s it is important to understand how to get there.  First, to enable 192GB you need 16GB DIMMs x 12 memory slots.  There will be a premium for a 16GB DIMM.  Knowing the options and determining the best, most cost effective solution is going to be dependent upon your environment.  When a large memory node is required, do you purchase the 16GB DIMM’s or go up to a Multi-socket solution?  If I decide to scale back on the memory (use 4GB or 8GB DIMMs instead of 16GB DIMMs) what is the performance impact to my application?  If I am cost sensitive, will the lower cost outweigh the lack of performance?  Can I use SSD’s (Solid State Disk drives) to compensate for any performance loss due to lower memory capacity?  There are many questions to think about when deciding the right configuration for your application and environment and I certainly can’t answer them here.

Let’s not forget the third memory channel enables a different set of optimal memory configurations.  Think x3 when deciding on how much memory to install into your node; 12GB, 24GB, 48GB, etc.  What happens when you don’t use an optimal configuration?  Well it depends, in most cases the impact is minimal, but let me add a bit of context around minimal:

·         Low bandwidth sensitivity (more dependent upon the processor for performance)

        E.g. Monte Carlo, Black-Scholes (financial modeling), BLAST (bioinformatics), AMBER (molecular dynamics)

        Expect less than a 2% difference between memory configurations*

Ÿ  Medium bandwidth sensitivity (somewhat balanced between memory and CPU usage)

        E.g. CFD, Explicit FEA, Implicit FEA (with robust I/O system)

        Expect approx. 5% degradation for non-optimal symmetrical configurations*

Ÿ  High bandwidth sensitivity (high access to the system memory)

        E.g. WRF (weather), POP (climate), MILC (physics), Reservoir Simulation

        Expect approx. 10% degradation for non-optimal symmetrical configurations*

The results are interesting.  In all three cases above, the degraded performance is always better than the performance you would have with only two memory channels.

When you hear about performance impact of non-optimal memory you can see by the examples above, it is application dependent and will not have a severe impact on your overall system performance.   

The Intel Xeon processor 5500 series offers support for huge memory nodes with the addition of the third memory channel.  Memory configurations in multiples of three are ideal, but if you decide to stay with a power of two configuration the performance should still exceed that of a solution based upon only two memory channels.

*Based upon Intel internal measurements

2 Comments Permalink
1

What do Jack Welch, Henry Ford and Albert Einstein have in common?

In their day they were innovators and they all accepted the need to adopt and change. 

Einstein once said “The definition of insanity is doing the same thing over and over again and expecting different results.” He obviously had no interest in repeating history over and over again.

Ford was heard to say “I am looking for a lot of men who have an infinite capacity to NOT know what can't be done.” He obviously was looking for people who asked “why” as opposed “why not.”  He sought thinkers and tinkerers.

Jack Welch had the shortest, but the most interesting quote.  “Change before you have to.”  As we all know he embraced change and created it too.

Technology gives us an opportunity to look at what we are doing now and find a better way to do it.  Used correctly, it can help you do more in less time with higher quality results.  Take the digital workbench (aka dual processor Intel® Xeon processor 5500 series based workstation) as an example.  While it can do CAD, it is really capable of much more.  It can help users model more what if’s than ever.  It can help users create and test ideas digitally long before they are made into physical prototypes.  While these new workstations can do this many continue to do just CAD.

What new workflows can you think of that will radically change the rate of your innovation?

1 Comments Permalink
1 2 Previous Next

Filter Blog

By author: By date: By tag: