Intel Communities: Message List - Intel RMM2 - lost password

Re: Intel RMM2 - lost password

webadmin@intel.com — Wed, 12 Sep 2012 18:05:45 GMT

or ROM-DOS can also be used.

Re: Intel RMM2 - lost password

webadmin@intel.com — Wed, 12 Sep 2012 01:33:08 GMT

MSDOS 6.22 should be fine. I suppose you're not running it in a command prompt window under Windows?

Re: Intel RMM2 - lost password

m.hatifnatt@gmail.com — Mon, 10 Sep 2012 21:04:01 GMT

Have you solved this issue? I can't even run kiratool under DOS, got this error: "Load error: can't switch mode"

What version of DOS you are using? MSDOS 6.22, MSDOS 8, FreeDOS?

Re: Intel RMM2 - lost password

webadmin@intel.com — Tue, 24 Apr 2012 02:03:42 GMT

You can set admin password using the following command under DOS:

kiratool -a admin passwd <password>

Re: Intel RMM2 - lost password

corrysjunk@gmail.com — Sun, 22 Apr 2012 20:30:17 GMT

I am getting the Device Authentication Failed message. Tried -f, tried defaults, all fail with the same message. How does one reset the superuser password when one has forgotten it/acquired the machine from another organization which forgot it/etc?

Re: Intel RMM2 - lost password

webadmin@intel.com — Fri, 09 Mar 2012 22:29:52 GMT

You're on the right track, Kiratool is the only method to reset a lost password. You do have to run it from a DOS boot disk on the server in question, as well.

Are you getting:

Could not get user list: Device Authentication failed

Intel RMM2 - lost password

webadmin@intel.com — Mon, 27 Feb 2012 01:18:58 GMT

Our organisation has recently inherited several intel RMM2 cards, however the previous password is still in-force on these modules. After reading through intel’s documentation, it appears there is no clear way in re-setting the RMM2 modules to its factory default setting. Does anyone know of another method in re-setting these RMM2 modules to their factory default settings?

On a side note, the Kiratool is throwing an unexpected I/O error (in DOS and EFI) mode.

Cheers