Intel Communities: Message List - Intel SS4200-E Active Directory Problem

Re: Intel SS4200-E Active Directory Problem

webadmin@intel.com — Tue, 17 Jul 2012 21:17:24 GMT

The problem is that when the DC is totally down you cannot access the web management console to switch the storage back to the workgroup mode .. please see the images below images.

Beside this I've tried to reset the storage from the behind button and every time i did this the storage took me to the wizard of creating new admin and password then it asks for a restart but after the restart i still get the same old issue as the images show.

Thanks.

Re: Intel SS4200-E Active Directory Problem

webadmin@intel.com — Tue, 17 Jul 2012 19:57:58 GMT

To switch between Workgroup mode and AD mode you use Storage Manager UI to switch between Workgroup mode and Active Directory mode (Settings > Network Services > Windows File Sharing (CIFS)).

Switching between Workgroup mode and AD mode will remove the existing permissions setting of all private folders.

After switching, a user with administrative privileges on the SS4200-E can reassign permissions setting or delete these private folders. This is to enable the content of private folders created under one mode to be accessible under another mode.

In the case of permanent loss of the domain controller, this feature provides a way to recover/delete AD folders under Workgroup mode.

Regards,

John

Re: Intel SS4200-E Active Directory Problem

webadmin@intel.com — Sun, 15 Jul 2012 12:26:16 GMT

I am having almost the same issue where i have permanently lost my domain controller, and i am trying to switch back to the workgroup environment by resetting the unit but the problem is that everytime i reset the unit i got the wizard to enter the admin username and password then it asks for a restart, but after i restarted the unit the web login still shows the old domain name shaded and it is asking about the username and password under the old domain environment and whenever i put the admin username and password for the lost domain i got (Domain Controller not found) ! please advice

Thanks.

Re: Intel SS4200-E password problem

webadmin@intel.com — Wed, 11 Jan 2012 18:30:22 GMT

Hello! Any ideas about my problem? I have the same problem yet...

Thanks!

Re: Intel SS4200-E password problem

webadmin@intel.com — Sun, 08 Jan 2012 13:52:33 GMT

To reset the password, you need to press the reset button and hold it for around 5 seconds, until the front panel power button begins to blink. For more details, see http://www.intel.com/support/motherboards/server/ss4200-e/sb/CS-028587.htm

Intel SS4200-E password problem

webadmin@intel.com — Sat, 07 Jan 2012 18:15:08 GMT

My son gave me a SS4200-E box. I put in 2 formated WD 500g drives. When I start it, EMC SOHO asks for a login and a password. My son can't provide these, he forgot them. I tried resetting the system using the system reset button. The system still wants a login and password. How can I overcome this?

Re: Intel SS4200-E Active Directory Problem

webadmin@intel.com — Wed, 04 Jan 2012 12:54:42 GMT

Yes i have already seen this guide and i have try to turn it back to workgroup and switch back to the domain with same behavior. Yes my domain is native 2003.

thanks

Re: Intel SS4200-E Active Directory Problem

webadmin@intel.com — Wed, 04 Jan 2012 12:37:37 GMT

I'm out of clue...

Below is a good AD troubleshooting document, if you haven't seen it already:

ftp://download.intel.com/support/motherboards/server/ss4200-e/sb/adip10.pdf

Maybe you can try to switch back to workgroup, check DNS and NTP settings and enable AD again.

Also, if I remember correctly the SS4200-E was only tested in Windows Server 2003 AD environment... Are you running Windows Server 2008?

Re: Intel SS4200-E Active Directory Problem

webadmin@intel.com — Fri, 30 Dec 2011 08:10:56 GMT

Sorry for my late answer but i was on holidays. Merry Cristmas!

Yes I can access it...If i login with domain admin credentials.

I think it is security problem.

Thanks

Re: Intel SS4200-E Active Directory Problem

webadmin@intel.com — Tue, 27 Dec 2011 07:40:34 GMT

If you login to the client PC using Domain Admin account, can you access the SS4200-E?