Intel Communities: Message List - DH67BL only shows splash screen and not the F2 & F5 menu for the firts time.

Re: DH67BL only shows splash screen and not the F2 & F5 menu for the firts time.

webadmin@intel.com — Sat, 16 Jun 2012 05:41:49 GMT

The issue got fixed, its beacuse.

i5 board does not support external USB plugins on load (like web cam connected). Remove the external USB and boot, it loads normal.

Re: DH67BL only shows splash screen and not the F2 & F5 menu for the firts time.

webadmin@intel.com — Sat, 18 Jun 2011 10:07:59 GMT

It is possible to enforce entering bios settings at startup.

You have to move the configuration jumper from the side it is, to the opposite side of the three pin header.

Then start and modify the bios settings to show F2 F10 F7. in the boot options.

Maybe a good idea is to load default bios settings and then modify only what you need to modify (few items, if no raid, disable intrusion detect).

After that you should put the jumper at normal place.

If your motherboard is a new board it probably has an old version of the bios such as 076.

When you reach the boot options in the bios let enable also F7 option (upgrade bios).

After your system looks in a better condition, you should upgrade the bios to the latest 122 rev. now.

To upgrade with F7 you have to prepare an USB key with BL0122P.BIO file on the root.

Pressing F7 at the splash screen with the key plugged in, then you can easiliy follow the screen indications to uprade the bios.

Select the flash key, then the file, and accept flashing.

After upgrade complete your system will restart itself, maybe two times !

Re: DH67BL only shows splash screen and not the F2 & F5 menu for the firts time.

webadmin@intel.com — Sat, 18 Jun 2011 07:42:52 GMT

I can see the options on PAST load, but not on load.

My system is not booting on first time, but loads on restart.

Re: DH67BL only shows splash screen and not the F2 & F5 menu for the firts time.

webadmin@intel.com — Fri, 17 Jun 2011 18:18:00 GMT

There is a option in the BIOS as what to display at POST , Like F-10 or F-2 or F-6 . In the Bios is where you change that.

DH67BL only shows splash screen and not the F2 & F5 menu for the firts time.

webadmin@intel.com — Fri, 17 Jun 2011 02:41:11 GMT

Hi,

I recently bought the DH67BL board with i5 processor and installed Windows 7. When I boot the machine I could see only the INTEL splash screen without F2 & F5 menu and the boot does not proceed further. Then if we press the restart button to boot, I am able to see the F2 & F5 menu and the system boots fine.

Please help me to make my system boot at the firts time.

Thanks,

Sathya.