Intel Communities: Message List - Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

webadmin@intel.com — Sat, 14 Apr 2012 13:54:26 GMT

I have the same problem with AUtocad...

DId you fixed it?

please tell me how to do??

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

webadmin@intel.com — Sun, 28 Aug 2011 16:21:31 GMT

You are a genius iremaster.

I was having the same problem with AutoCAD 2012, except it was with all the commands. Trim, offset. etc.

After I would hit the command button the screen would black out and come back 1 second later with an error message that the Graphics accelerator had crashed.

For me it was not just a matter of turning off Aero, I also had to change the Windows Team away from any of that transparent stuff and I am using Windows 7 Basic theme and it is working great.

Well done and thanks again.

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

webadmin@intel.com — Tue, 02 Aug 2011 10:37:43 GMT

Hi there!

I had the very same issue, just my video is 520M. Well, I made a good search all around the internet for a couple of months and found nothing until one day...I just had another crash during the attempts to use AutoCad2012. Then I remembered that some programs on my other laptop(Alienware, i7extreme, 2xNVIDIA QUADRO 3000M SLI) were crashing also sometimes and windows was changing to a basic theme. So I used the idea on my girl's laptop(the problematic one, i5 HD graphics combined with GeForce 520M). Up to now I do not have any more crashes of the intel driver since I use the basic theme. I suppose it is Windows7(R) Aero(R) that is messing up with the graphics, as it is using the intel HD graphics and at the same moment AutoCad is trying to use the 520M. At this moment the Intel GPU is trying to switch to 520M but while there are still pending data to process from the Aero. Well, of course this is mostly a guess work, of course, but the fact is that 1) if I use Aero - AutoCad crashes the Intel GPU, and 2) If I do not use the Aero AutoCad is working Just Fine. The test period is about a week only, but my girl is vary happy aver since this last stupid intervention. So - disable W7Aero before launching AutoCad2012. This is my advise. Thnks for reading:)))

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

joy.dorant@gmail.com — Fri, 08 Jul 2011 15:04:22 GMT

Where does LT stand for?

Nope sorry couldn't fix it, we need to wait till they launch AutoCAD 2013 i suppose

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

disha.ajay@gmail.com — Fri, 08 Jul 2011 13:19:53 GMT

I have the same problem with AUtocad LT 2012(Graphics acclelerator), DId you fixed it??? if so please tell me how to do??

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

joy.dorant@gmail.com — Sat, 25 Jun 2011 23:01:22 GMT

humm i hope thell fix it soon then =)

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

skifritter@i.ua — Sat, 25 Jun 2011 19:06:18 GMT

Problem in this igdkmd32(64).sys file (Intel graphics kemel mode driver)

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

joy.dorant@gmail.com — Thu, 16 Jun 2011 19:33:48 GMT

I get the error when i use the option "filet" ( used to smoothen the corners of a squar).

I asked this same question at the autocad forums and they told me its a problem with intel, so i put the same question here...

I had alot problems to contact autocad they send me to a place and that place sends me back again... so they couldnt give me a good awnser.

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

normskilight@gmail.com — Thu, 16 Jun 2011 17:49:25 GMT

everest is reporting a device for every possible simultaneous display output possible. this is common practice for curtain recourses/interfaces to be duplicated. this is how windows display management is currently designed.

is the crash occurring instantly or after some time?

Autocad will be the best people to report this issue to as due to the complicated cooperation between intel and nvidia on optimus, dont expect driver releases to be too frequent.

Re: Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered (1x GeForce GT 540M, 2x HD graphics 3000)

joy.dorant@gmail.com — Thu, 16 Jun 2011 04:42:09 GMT

Windows says i have 1 Nvidia and 1 Intel HD chip but when i check everest it says i have 2 Intel HD chips.

Is it not nessesary for windows to show me i have 2 HD chis\ps or is everest wrong?

I already use VMware with WinXP in it or did you meen i need to use VMware with Win7?