Intel Communities: Message List - Raid 5 on X58 / ICH10R need help

Re: Raid 5 on X58 / ICH10R need help

webadmin@intel.com — Mon, 14 Mar 2011 01:02:54 GMT

Can you see that the driver has been updated in device manager under “storage controllers” that should list “Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller” with driver tab showing 10.1.0.1008 ?

You may have to do this:

http://communities.intel.com/message/116743#116743

Re: Raid 5 on X58 / ICH10R need help

webadmin@intel.com — Sun, 13 Mar 2011 11:54:45 GMT

I installed it
Driver has been updated
but the application does not run. intel rst service not working

service is not installed. Installation done via RDP - can influence?

Re: Raid 5 on X58 / ICH10R need help

webadmin@intel.com — Sun, 13 Mar 2011 08:25:45 GMT

No, not installed
What makes this utility?

Re: Raid 5 on X58 / ICH10R need help

webadmin@intel.com — Sat, 12 Mar 2011 15:30:41 GMT

Have you installed Rapid Storage Technology?

http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=19607&ProductFamily=Chipsets&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+(Intel%c2%ae+RST)&lang=eng

Raid 5 on X58 / ICH10R need help

webadmin@intel.com — Sat, 12 Mar 2011 08:54:50 GMT

motherboard: asus Rampage III Extreme

chipset: intel X58 / ICH10R

Storage: Marvell® 9128 PCIe SATA 6Gb/s controller

2 xSATA 6.0 Gb/s ports Intel ICH10R controller

6 xSATA 3.0 Gb/s ports

0,1,5,10 Intel Matrix Storage Technology Support RAID SATA 3.0 Gb/s port

1 x External SATA 3.0 Gb/s port (SATA On-the-Go)

1 x JMicron® JMB363 PATA and SATA controller

driver Intel(R) ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller version 8.9.0.1023 (x64)

OS Windows Server 2008 R2

Raid 5 is built from 3 discs

once a week fails the second or third party disk

physical disks are OK, no bad blocks, drives under warranty, electronics okay.

We have to mark the drive as a normal party, the array is rebuilt. a week later the situation is repeated. What should I do? What's the problem?

on the same controller is a raid 0 array of two drives - the system no problems. All harddrives are the same.