Intel Communities: Message List - S5000PSL - No Post / No Video

Re: S5000PSL - No Post / No Video

webadmin@intel.com — Sun, 09 Sep 2012 19:07:03 GMT

I have this EXACT same problem. same circumstances, no post. Any ideas, different CPU perhaps? Thanks guys!

Re: S5000PSL - No Post / No Video

webadmin@intel.com — Wed, 15 Aug 2012 17:45:37 GMT

Aschorer,

As far as I know, if you don't hear beeps when you power on the system, then remove RAM and hear 3 beeps, this means the memory needs to be verified. See if you can run Memtest86+ against your memory. Or, you could power on the system with minimum RAM and rotate through the DIMMS until you find working or faulty DIMMS.

Jason

Re: S5000PSL - No Post / No Video

webadmin@intel.com — Mon, 13 Aug 2012 17:47:00 GMT

Because I think this question will get more attention in the Server Tech Support Forum, I have moved this discussion to http://communities.intel.com/message/164133#164133 .

Thanks,

- Cory

Re: S5000PSL - No Post / No Video

rguevara@vivamultimedia.com.gt — Sat, 11 Aug 2012 19:47:30 GMT

I have the same issue, a few days the server automtically resets without previous warnings, the system comes slow, and today finally the same lie aschorer

1) off off red green

2) red off red red

3) off off off amber

4) red amber red off

5) off off red green

6) red off red red

7) repeat 3-6 (each loop through this sequence is accompanied by a click/pop from the motherboard; system status LED shows green)

The board is dead, maybe someone know how solve this issue?

Rony

Re: S5000PSL - No Post / No Video

phin586@gmail.com — Sat, 11 Aug 2012 08:52:00 GMT

I am having the same issues. Has anyone had any luck?

Re: S5000PSL - No Post / No Video

davelmacd@gmail.com — Thu, 14 Jun 2012 19:53:04 GMT

Hi,

Did you get this solved ? am having almost the same problem and did what you did but still "dead" board

Any helped would be appreciated.

Dave.

Re: S5000PSL - No Post / No Video

webadmin@intel.com — Wed, 19 Jan 2011 21:13:12 GMT

(that is what I said. The S5000PSL uses rolling BIOS so the oly NBios recovery is to use the BIOS bank jumper to force the BIOS to the back-up bank)

Re: S5000PSL - No Post / No Video

webadmin@intel.com — Wed, 19 Jan 2011 05:12:35 GMT

You could try to recovery your BIOS since your problme looks like BIOS crash.

Re: S5000PSL - No Post / No Video

webadmin@intel.com — Sat, 15 Jan 2011 20:48:54 GMT

You could try clearing CMOS

and then the force BIOS bank jumper to roll over to the back up image.

Low chanc of either working since it died while in opperation, but these would be the next most likly after the other things you have done already.

Re: S5000PSL - No Post / No Video

webadmin@intel.com — Mon, 03 Jan 2011 22:27:34 GMT

You could also try going down to just one processor and one DIMM, if you haven't already. But that's as bare as I can think of stripping it.