Intel Communities: Message List

Re: Intel® Desktop Board DH67CL Questions ???

webadmin@intel.com — Wed, 05 Sep 2012 07:46:48 GMT

thanks mate but i have low budget thats y i have bouhjt old second hand Dvd writers which were not listed on there site but anyway than thanks so i thought then 6Gb/s is for Blue/Ray or new device hrdisk or dvd writers is it right....

i also have hrdisk old which work fine till core ix3 DH61 WW board but make trouble with this board like ... for first time when i put all rams and hrdisk my windows run very slowly and load in 5-10 minutes,... then i formaty my windows and rstart to see what happen , for second time when windows boots my pc is unable to loads drivers, i think i have plug SATA cable in black port , then i change the port to blue , then it work and loads...

so it make me confused that how and whioch port is stable wth my old devices .. and not face prblem like the first ti

Re: Intel® Desktop Board DH67CL Questions ???

webadmin@intel.com — Tue, 04 Sep 2012 17:14:10 GMT

thanks for telling me that !!!

now i know more my board...

but how should i know that my DvD writer or Hrdisk work work as 3GB/s or 6GB/s.

here is my devices ;

Re: Intel® Desktop Board DH67CL Questions ???

webadmin@intel.com — Mon, 03 Sep 2012 17:10:19 GMT

thanks for your help !

plz just tell me brifly about those SATA ports on my DH67CL Board and Back Panel SATA USB's

when and which device should i use with them. i am not pro so plz just tel me i have read guide but didnt get thoser point like SATA 3GB/s and 6GB/s etc

Intel® Desktop Board DH67CL Questions ???

webadmin@intel.com — Sun, 02 Sep 2012 10:50:17 GMT

hi !

i have bought

Intel® Desktop Board DH67CL

with Intel coreix3 processor and 6GB RAM 200GB Hrdisk

i have updated from intel DH61WW core ix3 to Intel DH67CL core ix5.

Intel® PC-Mainboard DH67CL

i have few questions about Intel DH67Cl Mainboard because i am new to this board.

when i use intel DH61WW core ix3 i have no problem but when i install my RAM and hrdisk on my new intel DH67CL Board i have face new issues ;

my old windows installed with old intel DH61WW board run slow on my new Board intel DH67CL , so i foramt my windows and install Windows 7 64bit agian, when pc format and start copying files i restart my PC and try to format it agin but i notice that my partition s were not shown in that format dialog and it ask for drivers to install , i tried but cant suceed then i change Hardisk SATA cable into Black port on board then it detects my partitions, windwos installs and run for two to three times and then when i Turn on my pc my windows stuck @ Windows Logo page after bios page, i check and my Hardisk was shown in bios .

Now i change my SATA cable to Blue GB/s port and my windows start working again.....

now i want to know that those SATA port both on board and Back Panels , when & on which devices should i use those ports...

-Like -

What is onboard Black SATA port use for ?

What is onboard Blue SATA port use for ?

What is onboard RED SATA port use for ?

where should i put my Two SATA DvD Writers and Hardisk so i work for me

sorry for my bad english

Re: Intel DH61WW CoreiX3 DvD Writers Issues

webadmin@intel.com — Tue, 03 Jul 2012 01:44:13 GMT

M right but mate i ask to about changing my Board to i5 and asking that my current corei3 processor will work well on corei5 board

Re: Intel DH61WW CoreiX3 DvD Writers Issues

webadmin@intel.com — Mon, 02 Jul 2012 08:40:33 GMT

Thanks for rply i chck SATA by changing its data cable, and i also change its socket on board

, and for IDE i am using IDE to SATA becoz my board has no IDE port.. i just want to change my board to core i5 if now i only change my Board it work perfect or not ....with core i3 processor.

Intel DH61WW CoreiX3 DvD Writers Issues

webadmin@intel.com — Sat, 30 Jun 2012 09:00:19 GMT

Q: i have Intel Core i3 Board DH61WW . i have one SATA DvD Writer and another IDE DvD Writer . i am faciong problem when i insert dvd in my dvdrom it hang and disappears from my computer and when i restart i come again.

Q: My Intel DH61WW Board has 2GB HD Graphoc Card. can i play games with this card like MAX PAYNE 3 . i have played all but with my Nvidia GeForce 9500GT card i never use my builtin card can these have close in specs Itel HD Graphics 2GB and Geforce 9500GT 512MB.

Q: i want to change my board to core i5 board so which modal is stable becoz now a days there are lots of Bugs in boards...

can i change my board only my Processor 2100 something will work perfect on core i5 board . i

Re: DvD Writer(SATA) disappearing problem

webadmin@intel.com — Wed, 04 Apr 2012 14:18:50 GMT

thnkx for replying !!!

Re: DvD Writer(SATA) disappearing problem

webadmin@intel.com — Wed, 04 Apr 2012 06:35:24 GMT

no not yet i have old Toshiba Dvd writer how can i find its firmware

Re: DvD Writer(SATA) disappearing problem

webadmin@intel.com — Tue, 03 Apr 2012 16:56:14 GMT

and thanks to you buddy !!!

okay tell me one thing mates if a SATA hrdrive or dvd drive has a Jumper settings can it affect anything my changing jumpers in SATA device .