Intel Communities: Message List

Re: Option ROM 9.6.0.1014 and Intel RST.

webadmin@intel.com — Thu, 03 May 2012 21:00:12 GMT

OK, no further responses.

I have updated the Intel RST software to v.10.6.0.1002 as advised earlier (the website shows 10.6.0.1022, but the software shows 10.6.0.1002).

Option ROM is still at v.9.6.0.1014. So far all is OK.

Would it be advisable/advantageous to upgrade the Option ROM to v.10.1.0.1008?

TIA

Re: Option ROM 9.6.0.1014 and Intel RST.

webadmin@intel.com — Wed, 25 Apr 2012 10:41:35 GMT

Looks like I can upgrade the motherboard to support Intel Option ROM v.10.1.0.1008 only.

Which stable version of Intel RST should I install with Intel Option ROM v.10.1.0.1008 and will I be able to use drives larger than 2TB with this setup?

TIA

Option ROM 9.6.0.1014 and Intel RST.

webadmin@intel.com — Sun, 22 Apr 2012 14:25:24 GMT

My motherboard has the Intel X58 / ICH10R chipset and Intel RST option ROM v.9.6.0.1014 with the SATA configuration in the BIOS set to RAID.

I have 4 x 1TB hard disks configured as 2 x RAID 1 arrays.

I am running Windows 7 Ultimate 64-bit and the Intel RST v.9.6.0.1014 driver/software. This setup is very stable for me.

However, I would like to add a single 3TB drive to my system.

In preparation for the 3TB drive, I installed the Intel RST v.10.8.0.1003 driver/software, which on installation and reboot seemed fine, but on subsequent reboots caused no end of problems. A system restore back to Intel RST v.9.6.0.1014 and all is OK again.

Which stable version of Intel RST should I install to access the full 3TB hard drive capacity?

TIA.

Intel Communities: Message List

Re: Option ROM 9.​6.​0.​1014 and Intel RST.

Re: Option ROM 9.​6.​0.​1014 and Intel RST.

Option ROM 9.​6.​0.​1014 and Intel RST.

Re: Option ROM 9.6.0.1014 and Intel RST.

Re: Option ROM 9.6.0.1014 and Intel RST.

Option ROM 9.6.0.1014 and Intel RST.