Intel Communities: Message List

Re: no video from new system using dz68bc board

webadmin@intel.com — Mon, 19 Dec 2011 15:14:27 GMT

To Starfox,

The memory set was G.Skill F3-12800CL9Q-16GBRL, a somewhat slower device than the one you mentioned.

It was working great with 3 of the 4 modules (12GB) for about a week then the Seasonic X Series X650 Gold power supply died; I had good luck with Seasonic before so I went with them again for this build - waiting on a replacement PS from newegg (Corsair this time).

Re: no video from new system using dz68bc board

webadmin@intel.com — Mon, 28 Nov 2011 17:58:22 GMT

the 16gb ram was on 4 modules. by swapping in and out I was able to find the one bad module.

no video from new system using dz68bc board

webadmin@intel.com — Mon, 28 Nov 2011 17:23:01 GMT

I built a new system using the dz68bc, intel 510 ssd, i5 2500k, seasonic 650w ps and 16gb ddr3 1600 gskill ripjaws. I expected that I would be able to use the hd3000 graphics but I'm getting nothing to my Samsung 2243bwx. The bios display shows following codes at power-up: 15, then 30, then 2e. As I said, I'm getting no video at all and no beep codes; and I don't find 2e in the provided list of bios codes. I don't have spare processors, memory, pci-e video cards or such equipment. Any troubleshooting help would be greatly appreciated.