Intel Communities: Message List

Re: DG41WV BR BOOT SLOW AFTER UPGRADE BIOS

webadmin@intel.com — Mon, 07 Nov 2011 11:07:59 GMT

It's a pity.

Thank´s hhelmbold.

Re: DG41WV BR BOOT SLOW AFTER UPGRADE BIOS

webadmin@intel.com — Wed, 02 Nov 2011 02:40:16 GMT

Hhelmbold, sorry for being slow to respond.
I use my PC for personal use. I replaced my 2x2GB DDR2 for DDR3 2X4 because it was a good deal. I do not need 2x4GB DDR3. I only use 1x4Gb effectively. So I chose to use only 1x4Gb.
This was a partial solution. I was afraid of trying the BIOS upgrades and downgrades.

My English is not very helpful, as you probably certainly have noticed.

But if this can help, I remember not having experienced the problem using the BIOS v07.

In this version, the problem presented was the malfunction when using the graphics card. Without the graphic card I do not remember having problems with the memories. However, I did not use the PC normally. When I was finishing installing all the hardware and software, the last piece was the graphics card. Then the problem occurred. So I stopped the whole process and tried to solve the problem.

Anyway, I take this opportunity to thank you for your interest and to all who helped me, especially Ricardo_Intel.

Re: DG41WV BR BOOT SLOW AFTER UPGRADE BIOS

webadmin@intel.com — Thu, 25 Aug 2011 02:25:03 GMT

Hi,

I understood, but after reading other posts I decided to do a simple test with the memories. At first I installed only one and then only the another and so I installed the two together, however, in different slots than they were before. Then I noticed that the problem occurs only when using the two memories at the same time, regardless of position. With only one memory everything works fine.
Any idea better than to downgrade the BIOS?

Thanks.

Re: DG41WV BR BOOT SLOW AFTER UPGRADE BIOS

webadmin@intel.com — Mon, 22 Aug 2011 16:13:46 GMT

Thanks Ricardo.

I followed your instructions, but the problem persists.
Should I restore the original BIOS and try again?

DG41WV BR BOOT SLOW AFTER UPGRADE BIOS

webadmin@intel.com — Thu, 18 Aug 2011 16:31:20 GMT

Hi,

After installing video card XFX GeForce 8600 GT Windows 7 operating system was very slow.

I tried another card, now the XFX GeForce 8500 GT and the same problem occurred.

So I updated the BIOS from version 07 to 16.

The problem of slowness in the operating system has been resolved and started using the graphics card normally.
Then I noticed that the beeps at startup no longer occur, and slowly started to occur at boot time until the beginning of loading the OS.
Turning on the computer, the screen appears with the logo intel slowly. Once completed I noticed an abnormally delay to allow the continuation of the boot.
By accessing the SETUP (F2) each line is written on the screen clearly abnormally slowly.
Although I can now use the system normally, but bothers me the slow boot.
Is there anything I can do to solve the problem?

Thanks,

EDU2R
INTEL DG41WV (BR)
XFX GEFORCE 8600 GT
REAL POWER 500W
KINGSTON 2 X 4GB DDR3 KVR1333D3N9/4G
INTEL PENTIUM DUAL CPU E2160 1.80Ghz