Activation : Intel® AMT Unprovision Utility : Comments

RE: Intel® AMT Unprovision Utility

webadmin@intel.com — Fri, 18 Jul 2008 04:47:49 GMT

One Word "YES". the AMT MULLIGAN is here..

RE: Intel® AMT Unprovision Utility

nick.molina@intel.com — Fri, 18 Jul 2008 17:09:56 GMT

How do you confirm success? Executing the command line disallowed my console from connecting to the client through ISDU but at the same time, the client's ME had the same settings as if it was provisioned.

RE: Intel® AMT Unprovision Utility

brett.g.mckown@intel.com — Fri, 18 Jul 2008 21:40:08 GMT

What was the specific command you used? Were you doing a full or partial unprovision? If it was a full unprovision, did you specify a new provisioning mode (Ent or SMB)?

RE: Intel® AMT Unprovision Utility

webadmin@intel.com — Tue, 18 Nov 2008 11:25:48 GMT

While running this utility, I have encountered the following error "The application failed to initialise properly

0xc0000135".I had used the command "

D:\unprovision1\Unprovision1>"UnprovisionEx.exe" -hostname -pass ]]> -full -Ent-

Please help.

RE: Intel® AMT Unprovision Utility

brett.g.mckown@intel.com — Tue, 18 Nov 2008 16:10:02 GMT

Obvious question: Do you have the Microsoft .NET Framework 2.0 installed?

Also, from the command line you used, make sure the trailing hyphen is omitted in '-Ent-'. It should only be '-Ent'.

RE: Intel® AMT Unprovision Utility

webadmin@intel.com — Wed, 19 Nov 2008 04:39:23 GMT

Thanks Brett,

I have installed Microsoft .NET Framework 2.0 and could unprovision Intel AMT machine.

However, though I had unprovisioned in the "full" with "Ent" mode,but the factory setting of the BIOS has not been set to default factory mode.It still has the password which was set after provisioning.

Hope you will throw some light on the issue.

RE: Intel® AMT Unprovision Utility

brett.g.mckown@intel.com — Wed, 19 Nov 2008 16:05:01 GMT

What AMT system are you running this tool against? Please provide the OEM/Manufacturer name, BIOS version, and AMT version (MEBx version information can usually be found at the top of the BIOX/MEBx configuration screen).

RE: Intel® AMT Unprovision Utility

webadmin@intel.com — Thu, 20 Nov 2008 09:01:49 GMT

IME Firmware Version (Intel AMT release)-3.0

Latest BIOS Upgrades - R01-B3

HECI/MEI-3.0.30.1086

LMS/SOL- 5.4.0.1065

OEM-Acer

I will be glad to provide you with any more information that you require.